*.orig
.*project
.settings
+*.iso
+trc6500-master-file_*.deb
+simple-cdd/build.log
+simple-cdd/dists/
+simple-cdd/images/
+trc6500-master-file/deb
--- /dev/null
+SHELL=/bin/bash
+
+MASTERFILE = trc6500-master-file
+
+VERSION = $(shell awk '/^$(MASTERFILE)/ {gsub(/[()]/, ""); print $$2; exit}' $(MASTERFILE)/debian/debian-changelog)
+
+ISOVER = $(shell echo $(VERSION) | sed 's/-.*$$//')
+
+ISO = simple-cdd/images/debian-7.8-amd64-CD-1.iso
+
+TARGET_ISO = debian-trc6500-$(ISOVER).iso
+
+TARGET_DEB = $(MASTERFILE)_$(VERSION)_all.deb
+
+all: iso masterfile
+
+iso: $(TARGET_ISO)
+
+$(TARGET_ISO): $(ISO)
+ mv $< $@
+
+$(ISO): $(TARGET_DEB)
+ cd simple-cdd && build-simple-cdd --dist wheezy --conf ./simple-cdd.conf
+
+masterfile: $(TARGET_DEB)
+
+$(TARGET_DEB):
+ make -C $(MASTERFILE)
+
+clean:
+ rm -f $(TARGET_DEB) $(TARGET_ISO)
* locale: English/US
* timezone: France
* keboard: French
-* eth1 / 10.133.28.160 / 255.255.255.0 / 10.133.28.231 / no dns
+* eth1 / 10.133.26.160 / 255.255.255.0 / 10.133.26.231 / no dns
* hostname: trc00.thalesgroup.com
* root password: thales
* local user: trc6500
aptitude install openssh-server rsync
eject
* on server
- ~/debian6500/master/opt/cluster/bin/sync_master.sh 10.133.28.160
+ ~/debian6500/master/opt/cluster/bin/sync_master.sh 10.133.26.160
* on blade
mount -a
mv /home /var/media/backup
Step 3:
* on server
## restore network connection
- cat ~trc6500/ftp/TRC6500.pub | ssh root@10.133.28.160 apt-key add -
+ cat ~trc6500/ftp/TRC6500.pub | ssh root@10.133.26.160 apt-key add -
* on blade
aptitude update
aptitude install $(cat /root/debian-list.txt)
* on server
- ~/debian6500/master/opt/cluster/bin/sync_master.sh 10.133.28.160
+ ~/debian6500/master/opt/cluster/bin/sync_master.sh 10.133.26.160
* on blade
update-rc.d waitswitches defaults
update-rc.d waitswitches enable
--- /dev/null
+master/opt/cluster/lite
\ No newline at end of file
+++ /dev/null
-deb [arch=amd64,all] http://192.168.0.53/debian-amd64 wheezy contrib main non-free
-deb [arch=amd64,all] http://192.168.0.53/cots softndesign main debug
--- /dev/null
+deb [arch=amd64,all] http://192.168.0.53/debian-amd64 wheezy contrib main non-free
+deb [arch=amd64,all] http://192.168.0.53/cots softndesign main debug
+++ /dev/null
-# rproxy configure options
-
-# Should webconfig be enabled?
-SERVICE=yes
-
-# SITES: filename containing site declarations
-SITES=/etc/rproxy/sites.csv
--- /dev/null
+# /etc/dhcp3/dhcpd.conf
+# Fichier de configuration du serveur DHCP de l'ISC (package 'dhcp3-server')
+# Formation Debian GNU/Linux par Alexis de Lattre
+# http://formation-debian.via.ecp.fr/
+
+# Consultez "man dhcpd.conf" pour avoir toutes les informations sur les options
+
+# DEBUT des options GLOBALES
+# Les options globales s'appliqueront par defaut a tous les sous-reseaux
+
+# Nom de domaine
+ddns-domainname "trc6500.thalesgroup.com";
+option domain-name "trc6500.thalesgroup.com";
+
+# Duree du bail en secondes
+default-lease-time 6000;
+max-lease-time 6000;
+server-name "maitre";
+
+# FIN des options GLOBALES
+
+# DEBUT de la declaration des sous-reseaux et des machines
+
+subnet 10.133.26.0 netmask 255.255.255.0
+{
+ next-server 10.133.26.160;
+ filename "pxelinux.0";
+ option domain-name-servers 10.133.26.160;
+ use-host-decl-names on;
+ authoritative;
+}
+
+# liste des lames a completer dans l'ordre de la baie
+
+#lame fusion, pistage, LSU
+host trc02 { hardware ethernet 00:00:00:00:00:02; fixed-address 10.133.26.162;}
+host trc03 { hardware ethernet 00:00:00:00:00:03; fixed-address 10.133.26.163;}
+
+#lames gonio
+host trc04 { hardware ethernet 00:00:00:00:00:04; fixed-address 10.133.26.164;}
+host trc05 { hardware ethernet 00:00:00:00:00:05; fixed-address 10.133.26.165;}
+host trc06 { hardware ethernet 00:00:00:00:00:06; fixed-address 10.133.26.166;}
+host trc07 { hardware ethernet 00:00:00:00:00:07; fixed-address 10.133.26.167;}
+host trc08 { hardware ethernet 00:00:00:00:00:08; fixed-address 10.133.26.168;}
+host trc09 { hardware ethernet 00:00:00:00:00:09; fixed-address 10.133.26.169;}
+host trc10 { hardware ethernet 00:00:00:00:00:0A; fixed-address 10.133.26.170;}
+host trc11 { hardware ethernet 00:00:00:00:00:0B; fixed-address 10.133.26.171;}
+host trc12 { hardware ethernet 00:00:00:00:00:0C; fixed-address 10.133.26.172;}
+host trc13 { hardware ethernet 00:00:00:00:00:0D; fixed-address 10.133.26.173;}
+host trc14 { hardware ethernet 00:00:00:00:00:0E; fixed-address 10.133.26.174;}
+host trc15 { hardware ethernet 00:00:00:00:00:0F; fixed-address 10.133.26.175;}
+host trc16 { hardware ethernet 00:00:00:00:00:10; fixed-address 10.133.26.176;}
+host trc17 { hardware ethernet 00:00:00:00:00:11; fixed-address 10.133.26.177;}
+host trc18 { hardware ethernet 00:00:00:00:00:12; fixed-address 10.133.26.178;}
+host trc19 { hardware ethernet 00:00:00:00:00:13; fixed-address 10.133.26.179;}
+host trc20 { hardware ethernet 00:00:00:00:00:14; fixed-address 10.133.26.180;}
+host trc21 { hardware ethernet 00:00:00:00:00:15; fixed-address 10.133.26.181;}
+host trc22 { hardware ethernet 00:00:00:00:00:16; fixed-address 10.133.26.182;}
+host trc23 { hardware ethernet 00:00:00:00:00:17; fixed-address 10.133.26.183;}
+host trc24 { hardware ethernet 00:00:00:00:00:18; fixed-address 10.133.26.184;}
+host trc25 { hardware ethernet 00:00:00:00:00:19; fixed-address 10.133.26.185;}
+host trc26 { hardware ethernet 00:00:00:00:00:1A; fixed-address 10.133.26.186;}
+host trc27 { hardware ethernet 00:00:00:00:00:1B; fixed-address 10.133.26.187;}
+host trc28 { hardware ethernet 00:00:00:00:00:1C; fixed-address 10.133.26.188;}
+host trc29 { hardware ethernet 00:00:00:00:00:1D; fixed-address 10.133.26.189;}
+host trc30 { hardware ethernet 00:00:00:00:00:1E; fixed-address 10.133.26.190;}
+host trc31 { hardware ethernet 00:00:00:00:00:1F; fixed-address 10.133.26.191;}
+host trc32 { hardware ethernet 00:00:00:00:00:20; fixed-address 10.133.26.192;}
+host trc33 { hardware ethernet 00:00:00:00:00:21; fixed-address 10.133.26.193;}
+host trc34 { hardware ethernet 00:00:00:00:00:22; fixed-address 10.133.26.194;}
+host trc35 { hardware ethernet 00:00:00:00:00:23; fixed-address 10.133.26.195;}
+
+#lames monitoring
+host trc36 { hardware ethernet 00:00:00:00:00:24; fixed-address 10.133.26.196;}
+host trc37 { hardware ethernet 00:00:00:00:00:25; fixed-address 10.133.26.197;}
+host trc38 { hardware ethernet 00:00:00:00:00:26; fixed-address 10.133.26.198;}
+host trc39 { hardware ethernet 00:00:00:00:00:27; fixed-address 10.133.26.199;}
+
# Duree du bail en secondes
default-lease-time 6000;
max-lease-time 6000;
-server-name "master";
+server-name "maitre";
# FIN des options GLOBALES
next-server 10.133.26.160;
filename "pxelinux.0";
option domain-name-servers 10.133.26.160;
+ #option routers 10.133.26.231;
use-host-decl-names on;
authoritative;
}
+# liste des lames a completer dans l'ordre de la baie
+
#lame fusion, pistage, LSU
-host trc01 { hardware ethernet 00:25:90:8A:B2:08; fixed-address 10.133.26.161;}
+host trc01-rf { hardware ethernet 00:25:90:8A:B2:08; fixed-address 10.133.26.161;}
#lames gonio
-host trc02 { hardware ethernet 00:25:90:4F:1E:8C; fixed-address 10.133.26.162;}
-host trc03 { hardware ethernet 00:25:90:4F:1E:8D; fixed-address 10.133.26.163;}
-host trc04 { hardware ethernet 00:25:90:4F:23:9E; fixed-address 10.133.26.164;}
-host trc05 { hardware ethernet 00:25:90:4F:23:9F; fixed-address 10.133.26.165;}
-host trc06 { hardware ethernet 00:25:90:4F:23:A4; fixed-address 10.133.26.166;}
-host trc07 { hardware ethernet 00:25:90:4F:23:A5; fixed-address 10.133.26.167;}
-host trc08 { hardware ethernet 00:25:90:4F:18:62; fixed-address 10.133.26.168;}
-host trc09 { hardware ethernet 00:25:90:4F:18:63; fixed-address 10.133.26.169;}
-host trc10 { hardware ethernet 00:25:90:4F:18:58; fixed-address 10.133.26.170;}
-host trc11 { hardware ethernet 00:25:90:4F:18:59; fixed-address 10.133.26.171;}
-host trc12 { hardware ethernet 00:25:90:4F:1A:28; fixed-address 10.133.26.172;}
-host trc13 { hardware ethernet 00:25:90:4F:1A:29; fixed-address 10.133.26.173;}
-host trc14 { hardware ethernet 00:25:90:4F:BB:72; fixed-address 10.133.26.174;}
-host trc15 { hardware ethernet 00:25:90:4F:BB:73; fixed-address 10.133.26.175;}
-host trc16 { hardware ethernet 00:25:90:4F:BB:22; fixed-address 10.133.26.176;}
-host trc17 { hardware ethernet 00:25:90:4F:BB:23; fixed-address 10.133.26.177;}
-host trc18 { hardware ethernet 00:25:90:4F:BA:F2; fixed-address 10.133.26.178;}
-host trc19 { hardware ethernet 00:25:90:4F:BA:F3; fixed-address 10.133.26.179;}
-host trc20 { hardware ethernet 00:25:90:4F:BA:F0; fixed-address 10.133.26.180;}
-host trc21 { hardware ethernet 00:25:90:4F:BA:F1; fixed-address 10.133.26.181;}
-host trc22 { hardware ethernet 00:25:90:4f:bb:1e; fixed-address 10.133.26.182;}
-host trc23 { hardware ethernet 00:25:90:4f:bb:1f; fixed-address 10.133.26.183;}
-host trc24 { hardware ethernet 00:25:90:4F:23:D4; fixed-address 10.133.26.184;}
-host trc25 { hardware ethernet 00:25:90:4F:23:D5; fixed-address 10.133.26.185;}
-host trc26 { hardware ethernet 00:25:90:4F:23:Dc; fixed-address 10.133.26.186;}
-host trc27 { hardware ethernet 00:25:90:4F:23:DD; fixed-address 10.133.26.187;}
-host trc28 { hardware ethernet 00:25:90:4F:BB:20; fixed-address 10.133.26.188;}
-host trc29 { hardware ethernet 00:25:90:4F:BB:21; fixed-address 10.133.26.189;}
-host trc30 { hardware ethernet 00:25:90:4F:E1:66; fixed-address 10.133.26.190;}
-host trc31 { hardware ethernet 00:25:90:4F:E1:67; fixed-address 10.133.26.191;}
-host trc32 { hardware ethernet 00:25:90:4F:EA:20; fixed-address 10.133.26.192;}
-host trc33 { hardware ethernet 00:25:90:4F:EA:21; fixed-address 10.133.26.193;}
+host trc02-rf { hardware ethernet 00:25:90:4F:1E:8C; fixed-address 10.133.26.162;}
+host trc03-rf { hardware ethernet 00:25:90:4F:23:9E; fixed-address 10.133.26.163;}
+host trc04-rf { hardware ethernet 00:25:90:4F:23:A4; fixed-address 10.133.26.164;}
+host trc05-rf { hardware ethernet 00:25:90:4F:18:62; fixed-address 10.133.26.165;}
+host trc06-rf { hardware ethernet 00:25:90:4F:18:58; fixed-address 10.133.26.166;}
+host trc07-rf { hardware ethernet 00:25:90:4F:1A:28; fixed-address 10.133.26.167;}
+host trc08-rf { hardware ethernet 00:25:90:4F:BB:72; fixed-address 10.133.26.168;}
+host trc09-rf { hardware ethernet 00:25:90:4F:BB:22; fixed-address 10.133.26.169;}
+host trc10-rf { hardware ethernet 00:25:90:4F:BA:F2; fixed-address 10.133.26.170;}
+host trc11-rf { hardware ethernet 00:25:90:4F:BA:F0; fixed-address 10.133.26.171;}
+host trc12-rf { hardware ethernet 00:25:90:4f:bb:1e; fixed-address 10.133.26.172;}
+host trc13-rf { hardware ethernet 00:25:90:4F:23:D4; fixed-address 10.133.26.173;}
+host trc14-rf { hardware ethernet 00:25:90:4F:23:Dc; fixed-address 10.133.26.174;}
+host trc15-rf { hardware ethernet 00:25:90:4F:BB:20; fixed-address 10.133.26.175;}
+host trc16-rf { hardware ethernet 00:25:90:4F:E1:66; fixed-address 10.133.26.176;}
+host trc17-rf { hardware ethernet 00:25:90:4F:EA:20; fixed-address 10.133.26.177;}
+host trc18-rf { hardware ethernet 00:25:90:4F:E2:D2; fixed-address 10.133.26.178;}
+host trc19-rf { hardware ethernet 00:25:90:4F:EF:00; fixed-address 10.133.26.179;}
+host trc20-rf { hardware ethernet 00:25:90:4F:E8:0A; fixed-address 10.133.26.180;}
+host trc21-rf { hardware ethernet 00:25:90:4F:C3:3C; fixed-address 10.133.26.181;}
+host trc22-rf { hardware ethernet 00:25:90:4F:BB:68; fixed-address 10.133.26.182;}
+host trc23-rf { hardware ethernet 00:25:90:4F:E1:62; fixed-address 10.133.26.183;}
+host trc24-rf { hardware ethernet 00:25:90:4F:e4:86; fixed-address 10.133.26.184;}
+host trc25-rf { hardware ethernet 00:25:90:4F:bb:74; fixed-address 10.133.26.185;}
#lames monitoring
-host trc34 { hardware ethernet 00:25:90:4F:E2:D2; fixed-address 10.133.26.194;}
-host trc35 { hardware ethernet 00:25:90:4F:EF:00; fixed-address 10.133.26.195;}
+host trc26-rf { hardware ethernet 00:25:90:4F:BB:6E; fixed-address 10.133.26.186;}
+host trc27-rf { hardware ethernet 00:25:90:4F:BB:66; fixed-address 10.133.26.187;}
+
+host trc28-rf { hardware ethernet 00:00:00:00:00:01; fixed-address 10.133.26.188;}
+host trc29-rf { hardware ethernet 00:00:00:00:00:02; fixed-address 10.133.26.189;}
+host trc30-rf { hardware ethernet 00:00:00:00:00:03; fixed-address 10.133.26.190;}
+host trc31-rf { hardware ethernet 00:25:90:88:E3:C2; fixed-address 10.133.26.191;}
+
+subnet 10.133.28.0 netmask 255.255.255.0
+{
+ next-server 10.133.28.160;
+ filename "pxelinux.0";
+ option routers 10.133.28.231;
+ option domain-name-servers 10.133.28.160;
+ use-host-decl-names on;
+ authoritative;
+}
+
+#lame fusion, pistage, LSU
+host trc01 { hardware ethernet 00:25:90:8A:B2:09; fixed-address 10.133.28.161;}
+
+#lames gonio
+host trc02 { hardware ethernet 00:25:90:4F:1E:8D; fixed-address 10.133.28.162;}
+host trc03 { hardware ethernet 00:25:90:4F:23:9F; fixed-address 10.133.28.163;}
+host trc04 { hardware ethernet 00:25:90:4F:23:A5; fixed-address 10.133.28.164;}
+host trc05 { hardware ethernet 00:25:90:4F:18:63; fixed-address 10.133.28.165;}
+host trc06 { hardware ethernet 00:25:90:4F:18:59; fixed-address 10.133.28.166;}
+host trc07 { hardware ethernet 00:25:90:4F:1A:29; fixed-address 10.133.28.167;}
+host trc08 { hardware ethernet 00:25:90:4F:BB:73; fixed-address 10.133.28.168;}
+host trc09 { hardware ethernet 00:25:90:4F:BB:23; fixed-address 10.133.28.169;}
+host trc10 { hardware ethernet 00:25:90:4F:BA:F3; fixed-address 10.133.28.170;}
+host trc11 { hardware ethernet 00:25:90:4F:BA:F1; fixed-address 10.133.28.171;}
+host trc12 { hardware ethernet 00:25:90:4f:bb:1f; fixed-address 10.133.28.172;}
+host trc13 { hardware ethernet 00:25:90:4F:23:D5; fixed-address 10.133.28.173;}
+host trc14 { hardware ethernet 00:25:90:4F:23:DD; fixed-address 10.133.28.174;}
+host trc15 { hardware ethernet 00:25:90:4F:BB:21; fixed-address 10.133.28.175;}
+host trc16 { hardware ethernet 00:25:90:4F:E1:67; fixed-address 10.133.28.176;}
+host trc17 { hardware ethernet 00:25:90:4F:EA:21; fixed-address 10.133.28.177;}
+host trc18 { hardware ethernet 00:25:90:4F:E2:D3; fixed-address 10.133.28.178;}
+host trc19 { hardware ethernet 00:25:90:4F:EF:01; fixed-address 10.133.28.179;}
+host trc20 { hardware ethernet 00:25:90:4F:E8:0B; fixed-address 10.133.28.180;}
+host trc21 { hardware ethernet 00:25:90:4F:C3:3D; fixed-address 10.133.28.181;}
+host trc22 { hardware ethernet 00:25:90:4F:BB:69; fixed-address 10.133.28.182;}
+host trc23 { hardware ethernet 00:25:90:4F:E1:63; fixed-address 10.133.28.183;}
+host trc24 { hardware ethernet 00:25:90:4F:e4:87; fixed-address 10.133.28.184;}
+host trc25 { hardware ethernet 00:25:90:4F:bb:75; fixed-address 10.133.28.185;}
+
+#lames monitoring
+host trc26 { hardware ethernet 00:25:90:4F:BB:6F; fixed-address 10.133.28.186;}
+host trc27 { hardware ethernet 00:25:90:4F:BB:67; fixed-address 10.133.28.187;}
+
+host trc28 { hardware ethernet 00:00:00:00:00:01; fixed-address 10.133.26.188;}
+host trc29 { hardware ethernet 00:00:00:00:00:02; fixed-address 10.133.26.189;}
+host trc30 { hardware ethernet 00:00:00:00:00:03; fixed-address 10.133.26.190;}
+host trc31 { hardware ethernet 00:25:90:88:E3:C3; fixed-address 10.133.28.191;}
--- /dev/null
+# /etc/dhcp3/dhcpd.conf
+# Fichier de configuration du serveur DHCP de l'ISC (package 'dhcp3-server')
+# Formation Debian GNU/Linux par Alexis de Lattre
+# http://formation-debian.via.ecp.fr/
+
+# Consultez "man dhcpd.conf" pour avoir toutes les informations sur les options
+
+
+# ============================================================================
+# V1.5
+# Copyright (C) THALES. All rights reserved
+# Author: Jean-Noel Raguenes
+# Date : 07/12/2009
+# Modification:
+# - V1.1: Herve Petit 10/03/2010
+# Reprise avec ajouts des sub net eth1
+# - V1.2: Herve Petit 24/06/2010
+# Ajout option routers sur sub net eth1
+# - V1.3: Herve Petit 25/08/2010
+# Remplacement lame trc13 par lame trc27 a cause pb d'init_statique
+# qui prennait 2 mn sur cette lame
+# - V1.4: Herve Petit 18/04/2011
+# Suppression definition de la route par defaut a partir du fichier dhcp
+# - V1.5: Laurent Mazet 09/05/2014
+# Netoyage
+# ============================================================================
+
+# DEBUT des options GLOBALES
+# Les options globales s'appliqueront par defaut a tous les sous-reseaux
+
+# Nom de domaine
+ddns-domainname "trc6500.thalesgroup.com";
+option domain-name "trc6500.thalesgroup.com";
+
+# Duree du bail en secondes
+default-lease-time 6000;
+max-lease-time 6000;
+server-name "master";
+
+# FIN des options GLOBALES
+
+# DEBUT de la declaration des sous-reseaux et des machines
+
+subnet 10.133.26.0 netmask 255.255.255.0
+{
+ next-server 10.133.26.160;
+ filename "pxelinux.0";
+ option domain-name-servers 10.133.26.160;
+ use-host-decl-names on;
+ authoritative;
+}
+
+#lame fusion, pistage, LSU
+host trc02 { hardware ethernet 00:25:90:8A:B2:08; fixed-address 10.133.26.162;}
+host trc03 { hardware ethernet 00:25:90:8A:B2:09; fixed-address 10.133.26.163;}
+
+#lames gonio
+host trc04 { hardware ethernet 00:25:90:4F:1E:8C; fixed-address 10.133.26.164;}
+host trc05 { hardware ethernet 00:25:90:4F:1E:8D; fixed-address 10.133.26.165;}
+host trc06 { hardware ethernet 00:25:90:4F:23:9E; fixed-address 10.133.26.166;}
+host trc07 { hardware ethernet 00:25:90:4F:23:9F; fixed-address 10.133.26.167;}
+host trc08 { hardware ethernet 00:25:90:4F:23:A4; fixed-address 10.133.26.168;}
+host trc09 { hardware ethernet 00:25:90:4F:23:A5; fixed-address 10.133.26.169;}
+host trc10 { hardware ethernet 00:25:90:4F:18:62; fixed-address 10.133.26.170;}
+host trc11 { hardware ethernet 00:25:90:4F:18:63; fixed-address 10.133.26.171;}
+host trc12 { hardware ethernet 00:25:90:4F:18:58; fixed-address 10.133.26.172;}
+host trc13 { hardware ethernet 00:25:90:4F:18:59; fixed-address 10.133.26.173;}
+host trc14 { hardware ethernet 00:25:90:4F:1A:28; fixed-address 10.133.26.174;}
+host trc15 { hardware ethernet 00:25:90:4F:1A:29; fixed-address 10.133.26.175;}
+host trc16 { hardware ethernet 00:25:90:4F:BB:72; fixed-address 10.133.26.176;}
+host trc17 { hardware ethernet 00:25:90:4F:BB:73; fixed-address 10.133.26.177;}
+host trc18 { hardware ethernet 00:25:90:4F:BB:22; fixed-address 10.133.26.178;}
+host trc19 { hardware ethernet 00:25:90:4F:BB:23; fixed-address 10.133.26.179;}
+host trc20 { hardware ethernet 00:25:90:4F:BA:F2; fixed-address 10.133.26.180;}
+host trc21 { hardware ethernet 00:25:90:4F:BA:F3; fixed-address 10.133.26.181;}
+host trc22 { hardware ethernet 00:25:90:4F:BA:F0; fixed-address 10.133.26.182;}
+host trc23 { hardware ethernet 00:25:90:4F:BA:F1; fixed-address 10.133.26.183;}
+host trc24 { hardware ethernet 00:25:90:4f:bb:1e; fixed-address 10.133.26.184;}
+host trc25 { hardware ethernet 00:25:90:4f:bb:1f; fixed-address 10.133.26.185;}
+host trc26 { hardware ethernet 00:25:90:4F:23:D4; fixed-address 10.133.26.186;}
+host trc27 { hardware ethernet 00:25:90:4F:23:D5; fixed-address 10.133.26.187;}
+host trc28 { hardware ethernet 00:25:90:4F:23:Dc; fixed-address 10.133.26.188;}
+host trc29 { hardware ethernet 00:25:90:4F:23:DD; fixed-address 10.133.26.189;}
+host trc30 { hardware ethernet 00:25:90:4F:BB:20; fixed-address 10.133.26.190;}
+host trc31 { hardware ethernet 00:25:90:4F:BB:21; fixed-address 10.133.26.191;}
+host trc32 { hardware ethernet 00:25:90:4F:E1:66; fixed-address 10.133.26.192;}
+host trc33 { hardware ethernet 00:25:90:4F:E1:67; fixed-address 10.133.26.193;}
+host trc34 { hardware ethernet 00:25:90:4F:EA:20; fixed-address 10.133.26.194;}
+host trc35 { hardware ethernet 00:25:90:4F:EA:21; fixed-address 10.133.26.195;}
+
+#lames monitoring
+host trc36 { hardware ethernet 00:25:90:4F:E2:D2; fixed-address 10.133.26.196;}
+host trc37 { hardware ethernet 00:25:90:4F:E2:D3; fixed-address 10.133.26.197;}
+host trc38 { hardware ethernet 00:25:90:4F:EF:00; fixed-address 10.133.26.198;}
+host trc39 { hardware ethernet 00:25:90:4F:EF:01; fixed-address 10.133.26.199;}
# that works even if disks are added and removed. See fstab(5).
#
# <dev> <mount point> <type> <options> <dump> <pass>
-/dev/sda1 / ext4 errors=remount-ro 0 1
-/dev/sda3 /var/media/backup ext4 defaults 0 2
+/dev/sda1 / ext4 noatime,errors=remount-ro 0 1
+/dev/sda3 /var/media/backup ext4 noatime,defaults 0 2
/dev/sda2 none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
# Reseau 10.133.26.0
# ===============================
-10.133.26.160 trc00 maitre sup fusion nfsserver
-10.133.26.161 trc01
-10.133.26.162 trc02 lsu
-10.133.26.163 trc03
-10.133.26.164 trc04 gon00
-10.133.26.165 trc05 gon01
-10.133.26.166 trc06 gon02
-10.133.26.167 trc07 gon03
-10.133.26.168 trc08 gon04
-10.133.26.169 trc09 gon05
-10.133.26.170 trc10 gon06
-10.133.26.171 trc11 gon07
-10.133.26.172 trc12 gon08
-10.133.26.173 trc13 gon09
-10.133.26.174 trc14 gon10
-10.133.26.175 trc15 gon11
-10.133.26.176 trc16 gon12
-10.133.26.177 trc17 gon13
-10.133.26.178 trc18 gon14
-10.133.26.179 trc19 gon15
-10.133.26.180 trc20 gon16
-10.133.26.181 trc21 gon17
-10.133.26.182 trc22 gon18
-10.133.26.183 trc23 gon19
-10.133.26.184 trc24 gon20
-10.133.26.185 trc25 gon21
-10.133.26.186 trc26 gon22
-10.133.26.187 trc27 gon23
-10.133.26.188 trc28 gon24
-10.133.26.189 trc29 gon25
-10.133.26.190 trc30 gon26
-10.133.26.191 trc31 gon27
-10.133.26.192 trc32 gon28
-10.133.26.193 trc33 gon29
-10.133.26.194 trc34 gon30
-10.133.26.195 trc35 gon31
-10.133.26.196 trc36 mon00
-10.133.26.197 trc37
-10.133.26.198 trc38 mon01
-10.133.26.199 trc39
+10.133.26.160 trc00-rf maitre-rf sup-rf fusion-rf
+10.133.26.161 trc01-rf lsu-rf
+10.133.26.162 trc02-rf gon00-rf
+10.133.26.163 trc03-rf gon01-rf
+10.133.26.164 trc04-rf gon02-rf
+10.133.26.165 trc05-rf gon03-rf
+10.133.26.166 trc06-rf gon04-rf
+10.133.26.167 trc07-rf gon05-rf
+10.133.26.168 trc08-rf gon06-rf
+10.133.26.169 trc09-rf gon07-rf
+10.133.26.170 trc10-rf gon08-rf
+10.133.26.171 trc11-rf gon09-rf
+10.133.26.172 trc12-rf gon10-rf
+10.133.26.173 trc13-rf gon11-rf
+10.133.26.174 trc14-rf gon12-rf
+10.133.26.175 trc15-rf gon13-rf
+10.133.26.176 trc16-rf gon14-rf
+10.133.26.177 trc17-rf gon15-rf
+10.133.26.178 trc18-rf gon16-rf
+10.133.26.179 trc19-rf gon17-rf
+10.133.26.180 trc20-rf gon18-rf
+10.133.26.181 trc21-rf gon19-rf
+10.133.26.182 trc22-rf gon20-rf
+10.133.26.183 trc23-rf gon21-rf
+10.133.26.184 trc24-rf gon22-rf
+10.133.26.185 trc25-rf gon23-rf
+10.133.26.186 trc26-rf mon00-rf
+10.133.26.187 trc27-rf mon01-rf
10.133.26.231 swg swg1
10.133.26.232 swg2
+# ===============================
+# Reseau 10.133.28.0
+# ===============================
+
# prod fe306 1 110->118
-10.133.26.110 fe306-1
+10.133.28.110 fe306-1
# prod fe306 2 120->128
-10.133.26.120 fe306-2
+10.133.28.120 fe306-2
# prod fe306 3 130->138
-10.133.26.130 fe306-3
+10.133.28.130 fe306-3
# prod fe306 4 140->148
-10.133.26.140 fe306-4
+10.133.28.140 fe306-4
# prod fe306 5 150->158
-10.133.26.150 fe306-5
+10.133.28.150 fe306-5
+
+10.133.28.159 amm00
+10.133.28.158 amm01
+
+10.133.28.160 trc00 maitre sup fusion nfsserver
+10.133.28.161 trc01 lsu
+10.133.28.162 trc02 gon00
+10.133.28.163 trc03 gon01
+10.133.28.164 trc04 gon02
+10.133.28.165 trc05 gon03
+10.133.28.166 trc06 gon04
+10.133.28.167 trc07 gon05
+10.133.28.168 trc08 gon06
+10.133.28.169 trc09 gon07
+10.133.28.170 trc10 gon08
+10.133.28.171 trc11 gon09
+10.133.28.172 trc12 gon10
+10.133.28.173 trc13 gon11
+10.133.28.174 trc14 gon12
+10.133.28.175 trc15 gon13
+10.133.28.176 trc16 gon14
+10.133.28.177 trc17 gon15
+10.133.28.178 trc18 gon16
+10.133.28.179 trc19 gon17
+10.133.28.180 trc20 gon18
+10.133.28.181 trc21 gon19
+10.133.28.182 trc22 gon20
+10.133.28.183 trc23 gon21
+10.133.28.184 trc24 gon22
+10.133.28.185 trc25 gon23
+10.133.28.186 trc26 mon00
+10.133.28.187 trc27 mon01
-10.133.26.159 amm00
-10.133.26.158 amm01
+10.133.28.231 swm
-10.133.26.253 matrix
-10.133.26.254 gps
+10.133.28.253 matrix
+10.133.28.254 gps
100.100.100.101 tmt
--- /dev/null
+127.0.0.1 localhost localhost.localdomain
+
+# The following lines are desirable for IPv6 capable hosts
+::1 ip6-localhost ip6-loopback
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
+
+10.133.26.160 trc00 master sup fusion nfsserver
+10.133.26.161 trc01
+10.133.26.162 trc02 lsu
+10.133.26.163 trc03
+10.133.26.164 trc04 gon00
+10.133.26.165 trc05 gon16
+10.133.26.166 trc06 gon01
+10.133.26.167 trc07 gon17
+10.133.26.168 trc08 gon02
+10.133.26.169 trc09 gon18
+10.133.26.170 trc10 gon03
+10.133.26.171 trc11 gon19
+10.133.26.172 trc12 gon04
+10.133.26.173 trc13 gon20
+10.133.26.174 trc14 gon05
+10.133.26.175 trc15 gon21
+10.133.26.176 trc16 gon06
+10.133.26.177 trc17 gon22
+10.133.26.178 trc18 gon07
+10.133.26.179 trc19 gon23
+10.133.26.180 trc20 gon08
+10.133.26.181 trc21 gon24
+10.133.26.182 trc22 gon09
+10.133.26.183 trc23 gon25
+10.133.26.184 trc24 gon10
+10.133.26.185 trc25 gon26
+10.133.26.186 trc26 gon11
+10.133.26.187 trc27 gon27
+10.133.26.188 trc28 gon12
+10.133.26.189 trc29 gon28
+10.133.26.190 trc30 gon13
+10.133.26.191 trc31 gon29
+10.133.26.192 trc32 gon14
+10.133.26.193 trc33 gon30
+10.133.26.194 trc34 gon15
+10.133.26.195 trc35 gon31
+10.133.26.196 trc36 mon00
+10.133.26.197 trc37
+10.133.26.198 trc38 mon01
+10.133.26.199 trc39
+
+10.133.26.231 sw1 swg swm
+10.133.26.232 sw2
+
+# prod fe306 1 110->118
+10.133.26.110 fe306-1
+# prod fe306 2 120->128
+10.133.26.120 fe306-2
+# prod fe306 3 130->138
+10.133.26.130 fe306-3
+# prod fe306 4 140->148
+10.133.26.140 fe306-4
+# prod fe306 5 150->158
+10.133.26.150 fe306-5
+
+10.133.26.159 amm00
+10.133.26.158 amm01
+
+10.133.26.253 matrix
+10.133.26.254 gps
+
+100.100.100.101 tmt
HOSTS="/etc/hosts"
ENABLE="yes"
-SCRIPT=/opt/trc6500/script/set_blade_power.tcl
+SCRIPTS=/opt/script/set_blade_power.tcl /opt/trc6500/script/set_blade_power.tcl
+SCRIPT=
PATH=/sbin:/usr/sbin:/bin:/usr/bin
[ -f /etc/default/ammwake ] && . /etc/default/ammwake
-[ -x $SCRIPT ] || exit 1
+for s in $SCRIPTS; do [ -x $s ] && SCRIPT=$s; done
+[ -x "$SCRIPT" ] || exit 1
[ "$ENABLE" = "yes" ] || exit 0
. /lib/lsb/init-functions
### END INIT INFO
ENABLE="yes"
-SCRIPT=/opt/trc6500/script/check_network.sh
+SCRIPTS=/opt/script/check_network.sh /opt/trc6500/script/check_network.sh
+SCRIPT=
TIMEOUT=360
PATH=/sbin:/usr/sbin:/bin:/usr/bin
[ -f /etc/default/waitslaves ] && . /etc/default/waitslaves
-[ -x $SCRIPT ] || exit 1
+for s in $SCRIPTS; do [ -x $s ] && SCRIPT=$s; done
+[ -x "$SCRIPT" ] || exit 1
[ "$ENABLE" = "yes" ] || exit 0
. /lib/lsb/init-functions
### END INIT INFO
ENABLE="yes"
-SCRIPT=/opt/trc6500/script/check_switches.sh
+SCRIPTS=/opt/script/check_switches.sh /opt/trc6500/script/check_switches.sh
+SCRIPT=
TIMEOUT=360
PATH=/sbin:/usr/sbin:/bin:/usr/bin
[ -f /etc/default/waitswitches ] && . /etc/default/waitswitches
-[ -x $SCRIPT ] || exit 1
+for s in $SCRIPTS; do [ -x $s ] && SCRIPT=$s; done
+[ -x "$SCRIPT" ] || exit 1
[ "$ENABLE" = "yes" ] || exit 0
. /lib/lsb/init-functions
post-up ip addr add 10.133.28.160/24 dev eth0
post-up ip route add default dev eth0
-
+# The secondary network interface
+auto eth1
iface eth1 inet static
address 10.133.26.161
netmask 255.255.255.0
+++ /dev/null
-# Host;portExt;portInt
-fe306-1;8110;80
-fe306-2;8120;80
-fe306-3;8130;80
-fe306-4;8140;80
-fe306-5;8150;80
-swg1;8231;80
-swg2;8232;80
# /etc/sudoers.d/trc6500
+trc6500 ALL = (root)NOPASSWD: /opt/script/check_network.sh *
trc6500 ALL = (root)NOPASSWD: /opt/trc6500/script/check_network.sh *
trc6500 ALL = (root)NOPASSWD: /sbin/halt
trc6500 ALL = (root)NOPASSWD: /usr/sbin/service ammwake *
trc6500 ALL = (root)NOPASSWD: /usr/sbin/service ipmiwake *
trc6500 ALL = (root)NOPASSWD: /usr/sbin/service trc6500 *
trc6500 ALL = (root)NOPASSWD: /usr/bin/make *
+trc6500 ALL = (root)NOPASSWD: /opt/script/change_configuration.sh *
trc6500 ALL = (root)NOPASSWD: /opt/trc6500/script/change_configuration.sh *
trc6500 ALL = (root)NOPASSWD: /root/bin/change_lgcore.sh *
# /etc/sudoers.d/webconfig
+webconfig ALL = (root)NOPASSWD: /opt/script/check_network.sh *
webconfig ALL = (root)NOPASSWD: /opt/trc6500/script/check_network.sh *
webconfig ALL = (root)NOPASSWD: /sbin/halt
webconfig ALL = (root)NOPASSWD: /usr/sbin/service ammwake *
webconfig ALL = (root)NOPASSWD: /usr/sbin/service ipmiwake *
webconfig ALL = (root)NOPASSWD: /usr/sbin/service trc6500 *
webconfig ALL = (root)NOPASSWD: /usr/bin/make *
+webconfig ALL = (root)NOPASSWD: /opt/script/change_configuration.sh *
webconfig ALL = (root)NOPASSWD: /opt/trc6500/script/change_configuration.sh *
webconfig ALL = (root)NOPASSWD: /root/bin/change_lgcore.sh *
--- /dev/null
+# Custom settings
+# minimize the swapping, still swap partition is necessary for hibernation
+vm.swappiness = 1
+vm.vfs_cache_pressure = 50
stop;/usr/share/webconfig;;Stop active phase;/opt/trc6500/bin/stop_active_phase
halt;/usr/share/webconfig;;Shutdown TRC6500;sudo halt
;;;FE306 maintenance actions;
-fe306;/usr/share/webconfig;;Configure all FE306;/opt/trc6500/script/configure_fe306 -a
-FE306-1-flash;/usr/share/webconfig;;Flash FE306-1;/opt/trc6500/script/flash_fe306 -i fe306-1
-FE306-2-flash;/usr/share/webconfig;;Flash FE306-2;/opt/trc6500/script/flash_fe306 -i fe306-2
-FE306-3-flash;/usr/share/webconfig;;Flash FE306-3;/opt/trc6500/script/flash_fe306 -i fe306-3
-FE306-4-flash;/usr/share/webconfig;;Flash FE306-4;/opt/trc6500/script/flash_fe306 -i fe306-4
-FE306-5-flash;/usr/share/webconfig;;Flash FE306-5;/opt/trc6500/script/flash_fe306 -i fe306-5
+fe306;/usr/share/webconfig;;Configure all FE306;/opt/script/configure_fe306 -a
+FE306-1-flash;/usr/share/webconfig;;Flash FE306-1;/opt/script/flash_fe306 -i fe306-1
+FE306-2-flash;/usr/share/webconfig;;Flash FE306-2;/opt/script/flash_fe306 -i fe306-2
+FE306-3-flash;/usr/share/webconfig;;Flash FE306-3;/opt/script/flash_fe306 -i fe306-3
+FE306-4-flash;/usr/share/webconfig;;Flash FE306-4;/opt/script/flash_fe306 -i fe306-4
+FE306-5-flash;/usr/share/webconfig;;Flash FE306-5;/opt/script/flash_fe306 -i fe306-5
;;;Matrix maintenance actions;
-maxtrix;/usr/share/webconfig;;Configure matrix;/opt/trc6500/script/configure_matrix
+maxtrix;/usr/share/webconfig;;Configure matrix;/opt/script/configure_matrix
;;;Switch maintenance actions;
-swg1-boot;/usr/share/webconfig;;Bootstrap switch SWG1;/opt/trc6500/script/configure_switch_bootstrap swg1
-swg2-boot;/usr/share/webconfig;;Bootstrap switch SWG2;/opt/trc6500/script/configure_switch_bootstrap swg2
-swm-boot;/usr/share/webconfig;;Bootstrap switch SWM;/opt/trc6500/script/configure_switch_bootstrap swm
-swg1;/usr/share/webconfig;;Configure switch SWG1;/opt/trc6500/script/configure_switch swg1
-swg2;/usr/share/webconfig;;Configure switch SWG2;/opt/trc6500/script/configure_switch swg2
-swm;/usr/share/webconfig;;Configure switch SWM;/opt/trc6500/script/configure_switch swm
-swg1-restart;/usr/share/webconfig;;Restart switch SWG1;/opt/trc6500/script/connect_switch.tcl -c reload swg1
-swg2-restart;/usr/share/webconfig;;Restart switch SWG2;/opt/trc6500/script/connect_switch.tcl -c reload swg2
-swm-restart;/usr/share/webconfig;;Restart switch SWM;/opt/trc6500/script/connect_switch.tcl -c reload swm
+sw1-boot;/usr/share/webconfig;;Bootstrap switch SW1;/opt/script/configure_switch_bootstrap sw1
+sw2-boot;/usr/share/webconfig;;Bootstrap switch SW2;/opt/script/configure_switch_bootstrap sw2
+swg1-boot;/usr/share/webconfig;;Bootstrap switch SWG1;/opt/script/configure_switch_bootstrap swg1
+swg2-boot;/usr/share/webconfig;;Bootstrap switch SWG2;/opt/script/configure_switch_bootstrap swg2
+swm-boot;/usr/share/webconfig;;Bootstrap switch SWM;/opt/script/configure_switch_bootstrap swm
+sw1;/usr/share/webconfig;;Configure switch SW1;/opt/script/configure_switch sw1
+sw2;/usr/share/webconfig;;Configure switch SW2;/opt/script/configure_switch sw2
+swg1;/usr/share/webconfig;;Configure switch SWG1;/opt/script/configure_switch swg1
+swg2;/usr/share/webconfig;;Configure switch SWG2;/opt/script/configure_switch swg2
+swm;/usr/share/webconfig;;Configure switch SWM;/opt/script/configure_switch swm
+sw1-restart;/usr/share/webconfig;;Restart switch SW1;/opt/script/connect_switch.tcl -c reload sw1
+sw2-restart;/usr/share/webconfig;;Restart switch SW2;/opt/script/connect_switch.tcl -c reload sw2
+swg1-restart;/usr/share/webconfig;;Restart switch SWG1;/opt/script/connect_switch.tcl -c reload swg1
+swg2-restart;/usr/share/webconfig;;Restart switch SWG2;/opt/script/connect_switch.tcl -c reload swg2
+swm-restart;/usr/share/webconfig;;Restart switch SWM;/opt/script/connect_switch.tcl -c reload swm
;;;Blade maintenance actions;
-bios;/usr/share/webconfig;;Configure BIOS for all Supermicro blades;sudo /opt/trc6500/script/check_network.sh -c '/opt/bios/update_bios_cfg.sh -y -Y' -o
-ipmi;/usr/share/webconfig;;Configure IPMI for all Supermicro blades;sudo /opt/trc6500/script/check_network.sh -c '/opt/ipmi/update_blade_cfg.sh -y -Y' -o
+bios;/usr/share/webconfig;;Configure BIOS for all Supermicro blades;sudo /opt/script/check_network.sh -c '/opt/bios/update_bios_cfg.sh -y -Y' -o
+ipmi;/usr/share/webconfig;;Configure IPMI for all Supermicro blades;sudo /opt/script/check_network.sh -c '/opt/ipmi/update_blade_cfg.sh -y -Y' -o
/dce;/usr/share/dce;/etc/dhcp/dhcpd.conf;DHCPD Configuration Editor;sudo service isc-dhcp-server restart
-ntp;/usr/share/webconfig;;Synchronize time and date on all blades;sudo /opt/trc6500/script/check_network.sh -c 'service chrony stop; ntpdate-debian; service chrony start' -o
+ntp;/usr/share/webconfig;;Synchronize time and date on all blades;sudo /opt/script/check_network.sh -c 'service chrony stop; ntpdate-debian; service chrony start' -o
;;;Internal equipements;
http://10.133.26.160:8110;/usr/share/webconfig;;FE306-1;:goto:
http://10.133.26.160:8120;/usr/share/webconfig;;FE306-2;:goto:
ipmiwake;/usr/share/webconfig;;Power on all SuperMicro slaves;sudo service ipmiwake start
ammwake;/usr/share/webconfig;;Power off all HS22 IBM slaves;sudo service ammwake stop
ipmiwake;/usr/share/webconfig;;Power off all SuperMicro slaves;sudo service ipmiwake stop
-mediatray;/usr/share/webconfig;;Set media-tray to HS22 master blade;/opt/trc6500/script/set_mediatray amm00 -b 1
-mediatray;/usr/share/webconfig;;Remove media-tray on HS22 chassis;/opt/trc6500/script/set_mediatray amm00 -b 0 && /opt/trc6500/script/set_mediatray amm01 -b 0
+mediatray;/usr/share/webconfig;;Set media-tray to HS22 master blade;/opt/script/set_mediatray amm00 -b 1
+mediatray;/usr/share/webconfig;;Remove media-tray on HS22 chassis;/opt/script/set_mediatray amm00 -b 0 && /opt/script/set_mediatray amm01 -b 0
;;;Setup hardware actions;
-8mhzmhf;/usr/share/webconfig;;Setup 8MHzMHF mode;sudo /opt/trc6500/script/change_configuration.sh 8MHzMHF
-12mhzdf;/usr/share/webconfig;;Setup 12MHzDF mode;sudo /opt/trc6500/script/change_configuration.sh 12MHzDF
-12mhzmdf;/usr/share/webconfig;;Setup 12MHzMDF mode;sudo /opt/trc6500/script/change_configuration.sh 12MHzMDF
-30mhzmdf;/usr/share/webconfig;;Setup 30MHzMDF mode;sudo /opt/trc6500/script/change_configuration.sh 30MHzMDF
-30mhzmhf;/usr/share/webconfig;;Setup 30MHzMHF mode;sudo /opt/trc6500/script/change_configuration.sh 30MHzMHF
-hw_ibm;/usr/share/webconfig;;Setup IBM HS22 chassis mode;sudo /opt/trc6500/script/change_configuration.sh hw_ibm
-hw_supermicro;/usr/share/webconfig;;Setup FatTwin Supermicro chassis mode;sudo /opt/trc6500/script/change_configuration.sh hw_supermicro
-tz_zulu;/usr/share/webconfig;;Setup Zulu timezone;sudo /opt/trc6500/script/change_configuration.sh tz_zulu
-tz_paris;/usr/share/webconfig;;Setup Europe/Paris timezone;sudo /opt/trc6500/script/change_configuration.sh tz_paris
+8mhzmhf;/usr/share/webconfig;;Setup 8MHzMHF mode;sudo /opt/script/change_configuration.sh 8MHzMHF
+12mhzdf;/usr/share/webconfig;;Setup 12MHzDF mode;sudo /opt/script/change_configuration.sh 12MHzDF
+12mhzmdf;/usr/share/webconfig;;Setup 12MHzMDF mode;sudo /opt/script/change_configuration.sh 12MHzMDF
+30mhzmdf;/usr/share/webconfig;;Setup 30MHzMDF mode;sudo /opt/script/change_configuration.sh 30MHzMDF
+30mhzmdf.lite;/usr/share/webconfig;;Setup 30MHzMDF lite mode;sudo /opt/script/change_configuration.sh 30MHzMDF.lite
+30mhzmhf;/usr/share/webconfig;;Setup 30MHzMHF mode;sudo /opt/script/change_configuration.sh 30MHzMHF
+hw_ibm;/usr/share/webconfig;;Setup IBM HS22 chassis mode;sudo /opt/script/change_configuration.sh hw_ibm
+hw_supermicro;/usr/share/webconfig;;Setup FatTwin Supermicro chassis mode;sudo /opt/script/change_configuration.sh hw_supermicro
+tz_zulu;/usr/share/webconfig;;Setup Zulu timezone;sudo /opt/script/change_configuration.sh tz_zulu
+tz_paris;/usr/share/webconfig;;Setup Europe/Paris timezone;sudo /opt/script/change_configuration.sh tz_paris
tarballs;/usr/share/webconfig;;Build tarballs;sudo make -f /opt/cluster/Makefile all
;;;Install LgCore actions;
install-usb;/usr/share/webconfig;;Install LgCore from USB key;sudo /root/bin/change_lgcore.sh usb
#
# In order to enable or disable this script just change the execution
# bits.
-#
-# By default this script does nothing.
-# distribute interrupt for eth0 on core 1-5
-core=(2 4 8 10 20)
+# distribute interrupt for eth0 on core 1-4
+core=(2 4 8 10)
+eth=0
+l=0
+for i in $(awk '/eth'$eth'/ {sub(/:/, ""); print $1}' /proc/interrupts); do
+ echo "echo ${core[$l]} > /proc/irq/$i/smp_affinity"
+ l=$(expr $l + 1)
+ [ $l -eq ${#core[*]} ] && l=1
+done
l=0
-for i in $(awk '/eth0/ {sub(/:/, ""); print $1}' /proc/interrupts); do
- echo ${core[$l]} > /proc/irq/$i/smp_affinity
- let l++
- [ $l -eq 6 ] && l=1
+
+# fill screen of dummy lines to keep last messages in history
+for i in $(seq 1 25); do
+ echo TRC6500
done
exit 0
# *
PROGNAME=$(basename $0)
-BLADES="acq slave rec"
+BLADES="acq slave lite rec"
CLUSTER=/opt/cluster
EXCLUDE=/tmp/$PROGNAME-exclude-$$
TFTP=/opt/tftp
--- /dev/null
+#!/bin/bash -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+
+# distribute interrupt for eth0 on core 0
+core=(800)
+eth=0
+l=0
+for i in $(awk '/eth'$eth'/ {sub(/:/, ""); print $1}' /proc/interrupts); do
+ echo "echo ${core[$l]} > /proc/irq/$i/smp_affinity"
+ l=$(expr $l + 1)
+ [ $l -eq ${#core[*]} ] && l=1
+done
+
+# distribute interrupt for eth1 on core 11
+core=(1)
+eth=1
+l=0
+for i in $(awk '/eth'$eth'/ {sub(/:/, ""); print $1}' /proc/interrupts); do
+ echo "echo ${core[$l]} > /proc/irq/$i/smp_affinity"
+ l=$(expr $l + 1)
+ [ $l -eq ${#core[*]} ] && l=1
+done
+
+# fill screen of dummy lines to keep last messages in history
+for i in $(seq 1 25); do
+ echo TRC6500
+done
+
+exit 0
tmpfs /tmp tmpfs defaults 0 0
#export du repertoire de dump
-nfsserver:/dump /dump nfs acregmax=5,acdirmax=5,defaults 0 0
-nfsserver:/opt /opt nfs acregmax=5,acdirmax=5,defaults 0 0
-nfsserver:/home /home nfs acregmax=5,acdirmax=5,defaults 0 0
+nfsserver:/dump /dump nfs acregmax=5,acdirmax=5,noatime,async,defaults 0 0
+nfsserver:/opt /opt nfs acregmax=5,acdirmax=5,noatime,async,defaults 0 0
+nfsserver:/home /home nfs acregmax=5,acdirmax=5,noatime,async,defaults 0 0
-LABEL=REC /var/media/rec ext4 defaults 0 2
+LABEL=REC /var/media/rec ext4 noatime,defaults 0 2
#
# In order to enable or disable this script just change the execution
# bits.
-#
-# By default this script does nothing.
# fix f*0^$#g local mount
mount -a
+# fill screen of dummy lines to keep last messages in history
+for i in $(seq 1 25); do
+ echo TRC6500
+done
+
exit 0
tmpfs /tmp tmpfs defaults 0 0
#export du repertoire de dump
-nfsserver:/dump /dump nfs acregmax=5,acdirmax=5,defaults 0 0
-nfsserver:/opt /opt nfs acregmax=5,acdirmax=5,defaults 0 0
-nfsserver:/home /home nfs acregmax=5,acdirmax=5,defaults 0 0
+nfsserver:/dump /dump nfs acregmax=5,acdirmax=5,noatime,async,defaults 0 0
+nfsserver:/opt /opt nfs acregmax=5,acdirmax=5,noatime,async,defaults 0 0
+nfsserver:/home /home nfs acregmax=5,acdirmax=5,noatime,async,defaults 0 0
auto eth0
iface eth0 inet dhcp
pre-up ip addr flush dev eth0
- # FE306 pano
- post-up ip route add 238.75.0.0/16 dev eth0
- # FE306 WP channels
- # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
- # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000)
- # => 2eme octet associe aux valeurs de 224 a 255
- post-up ip route add 238.224.0.0/11 dev eth0
- # FE306 RF channels
- # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
- # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000)
- # => 2eme octet associe aux valeurs de 192 a 223
- post-up ip route add 238.192.0.0/11 dev eth0
- # Delay line
- post-up ip route add 239.0.0.0/8 dev eth0
- # FE306 authentification
- post-up ip route add 238.0.0.0/24 dev eth0
- # Sensor prod
- post-up ip route add 225.0.0.0/8 dev eth0
auto eth1
iface eth1 inet dhcp
+ pre-up ip addr flush dev eth1
#
# In order to enable or disable this script just change the execution
# bits.
-#
-# By default this script does nothing.
+# fill screen of dummy lines to keep last messages in history
for i in $(seq 1 25); do
echo TRC6500
done
-# distribute interrupt for eth0 on core 1-6
-core=(2 4 8 10 20 40)
-l=0
-for i in $(awk '/eth0/ {sub(/:/, ""); print $1}' /proc/interrupts); do
- echo ${core[$l]} > /proc/irq/$i/smp_affinity
- let l++
- [ $l -eq 6 ] && l=1
-done
-
exit 0
--- /dev/null
+PROMPT 2
+TIMEOUT 30
+UI /menu.c32
+
+KBDMAP /fr.kmp
+
+MENU TITLE [[ PXE BOOT ]]
+
+DEFAULT debian
+
+LABEL debian
+ MENU LABEL ^Debian 7 (TRC6500)
+ KERNEL /vmlinuz
+ INITRD /initrd.img
+ APPEND noinitrd ramdisk_size=8192 boot=tftp fastboot tftpserver=10.133.26.160 tarballs=root.tgz,slave.tgz,lite.tgz
+
+LABEL freedos
+ MENU LABEL ^FreeDos 1.0
+ KERNEL /memdisk
+ INITRD /balder10.imz
+ APPEND -
--- /dev/null
+macro name VERSION
+macro description 2.3 full-duplex
+@
+!
+version 12.2
+no service pad
+service timestamps debug datetime msec
+service timestamps log datetime msec
+service password-encryption
+service compress-config
+service sequence-numbers
+!
+hostname SWG1
+!
+boot-start-marker
+boot system flash bootflash:cat4500-ipbase-mz.122-54.SG1.bin
+boot system flash bootflash:cat4500e-ipbase-mz.122-54.SG1.bin
+boot-end-marker
+!
+enable secret 5 $1$OMTZ$xM5SrEPag4m7MGrV1u86/0
+!
+!
+no aaa new-model
+ip subnet-zero
+no ip domain-lookup
+!
+!
+ip vrf mgmtVrf
+!
+ip routing
+ip multicast-routing
+ip igmp snooping vlan 1 immediate-leave
+vtp mode transparent
+!
+power redundancy-mode redundant
+!
+!
+!
+!
+spanning-tree mode rapid-pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+vlan 10
+ name IFORMATION-SYSTEM
+!
+!
+!
+interface Port-channel1
+ switchport
+!
+interface FastEthernet1
+ ip vrf forwarding mgmtVrf
+ no ip address
+ speed auto
+ duplex auto
+!
+interface GigabitEthernet1/1
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/2
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/3
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/4
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/5
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/6
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/7
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/8
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/9
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/10
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/11
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/12
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/13
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/14
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/15
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/16
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/17
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/18
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/19
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/20
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/21
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/22
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/23
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/24
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/25
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/26
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/27
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/28
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/29
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/30
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/31
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/32
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/33
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/34
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/35
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/36
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/37
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/38
+ speed auto
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/39
+ speed 100
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/40
+ speed 100
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/41
+ speed 100
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/42
+ speed 100
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/43
+ speed 100
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/44
+ speed 100
+ duplex full
+ spanning-tree portfast
+!
+interface GigabitEthernet1/45
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/46
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/47
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/48
+ switchport access vlan 10
+ switchport mode access
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface TenGigabitEthernet1/49
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface TenGigabitEthernet1/50
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface TenGigabitEthernet1/51
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface TenGigabitEthernet1/52
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface Vlan1
+ ip address 10.133.26.231 255.255.248.0
+ ip pim dense-mode
+!
+interface Vlan10
+ ip address 100.100.100.100 255.255.255.0
+ ip pim sparse-mode
+!
+ip forward-protocol udp echo
+ip route 0.0.0.0 0.0.0.0 100.100.100.101
+ip http server
+ip pim rp-address 10.133.26.231
+!
+access-list 101 permit udp host 10.133.26.160 any eq echo
+!
+control-plane
+!
+!
+snmp-server community public RO
+!
+!
+line con 0
+ password 7 01070E05570E15
+ logging synchronous
+ login
+ stopbits 1
+line vty 0 4
+ password 7 071B294D420C0A
+ login
+line vty 5 15
+ password 7 120D0D161E0E1F
+ login
+!
+ntp clock-period 17179594
+ntp server 10.133.26.254
+ntp server 10.133.26.160
+end
--- /dev/null
+macro name VERSION
+macro description 2.3 full-duplex
+@
+!
+version 12.2
+no service pad
+service timestamps debug datetime msec
+service timestamps log datetime msec
+service password-encryption
+service compress-config
+service sequence-numbers
+!
+hostname SWG2
+!
+boot-start-marker
+boot system flash bootflash:cat4500-ipbase-mz.122-54.SG1.bin
+boot system flash bootflash:cat4500e-ipbase-mz.122-54.SG1.bin
+boot-end-marker
+!
+enable secret 5 $1$OMTZ$xM5SrEPag4m7MGrV1u86/0
+!
+!
+no aaa new-model
+ip subnet-zero
+no ip domain-lookup
+!
+!
+ip vrf mgmtVrf
+!
+ip routing
+ip multicast-routing
+ip igmp snooping vlan 1 immediate-leave
+vtp mode transparent
+!
+power redundancy-mode redundant
+!
+!
+!
+!
+spanning-tree mode rapid-pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+!
+!
+!
+!
+!
+interface Port-channel1
+ switchport
+!
+interface FastEthernet1
+ ip vrf forwarding mgmtVrf
+ no ip address
+ speed auto
+ duplex auto
+!
+interface GigabitEthernet1/1
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/2
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/3
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/4
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/5
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/6
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/7
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/8
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/9
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/10
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/11
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/12
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/13
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/14
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/15
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/16
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/17
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/18
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/19
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/20
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/21
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/22
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/23
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/24
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/25
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/26
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/27
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/28
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/29
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/30
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/31
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/32
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/33
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/34
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/35
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/36
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/37
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/38
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/39
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/40
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/41
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/42
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/43
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/44
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/45
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/46
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/47
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface GigabitEthernet1/48
+!
+!
+ media-type rj45
+ speed auto
+ duplex auto
+ spanning-tree portfast
+!
+interface TenGigabitEthernet1/49
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface TenGigabitEthernet1/50
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface TenGigabitEthernet1/51
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface TenGigabitEthernet1/52
+ channel-protocol pagp
+ channel-group 1 mode desirable
+!
+interface Vlan1
+ ip address 10.133.26.232 255.255.248.0
+ ip pim dense-mode
+!
+!
+!
+!
+!
+!
+!
+ip http server
+ip pim rp-address 10.133.26.232
+!
+!
+!
+control-plane
+!
+!
+snmp-server community public RO
+!
+!
+line con 0
+ password 7 01070E05570E15
+ logging synchronous
+ login
+ stopbits 1
+line vty 0 4
+ password 7 071B294D420C0A
+ login
+line vty 5 15
+ password 7 120D0D161E0E1F
+ login
+!
+ntp clock-period 17179594
+ntp server 10.133.26.254
+ntp server 10.133.26.160
+end
!
interface GigabitEthernet1/1
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/2
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/3
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/4
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/5
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/6
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/7
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/8
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/9
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/10
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/11
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/12
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/13
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/14
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/15
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/16
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/17
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/18
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/19
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/20
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/21
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/22
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/23
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/24
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/25
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/26
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/27
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/28
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/29
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/30
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/31
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/32
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/33
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/34
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/35
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/36
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/37
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/38
speed auto
- duplex full
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/39
- speed 100
- duplex full
+ speed auto
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/40
- speed 100
- duplex full
+ speed auto
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/41
- speed 100
- duplex full
+ speed auto
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/42
- speed 100
- duplex full
+ speed auto
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/43
- speed 100
- duplex full
+ speed auto
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/44
- speed 100
- duplex full
+ speed auto
+ duplex auto
spanning-tree portfast
!
interface GigabitEthernet1/45
spanning-tree portfast
!
interface GigabitEthernet1/48
- switchport access vlan 10
- switchport mode access
media-type rj45
speed auto
duplex auto
ip address 10.133.26.231 255.255.255.0
ip pim dense-mode
!
-interface Vlan10
- ip address 100.100.100.100 255.255.255.0
- ip pim sparse-mode
-!
-ip forward-protocol udp echo
-ip route 0.0.0.0 0.0.0.0 100.100.100.101
ip http server
ip pim rp-address 10.133.26.231
!
-access-list 101 permit udp host 10.133.26.160 any eq echo
!
control-plane
!
!
-snmp-server community public RO
-!
-!
line con 0
password 7 01070E05570E15
logging synchronous
password 7 120D0D161E0E1F
login
!
-ntp clock-period 17179594
-ntp server 10.133.26.254
+ntp clock-period 17179537
ntp server 10.133.26.160
+ntp server 10.133.28.160
+ntp server 10.133.28.254
end
-macro name VERSION
-macro description 2.3 full-duplex
-@
+
+!
+! Last configuration change at 08:13:53 UTC Wed Jun 12 2013
+! NVRAM config last updated at 08:21:36 UTC Wed Jun 12 2013
!
version 12.2
no service pad
enable secret 5 $1$OMTZ$xM5SrEPag4m7MGrV1u86/0
!
!
+macro name VERSION
+macro description 2.3
+@
+!
no aaa new-model
ip subnet-zero
no ip domain-lookup
!
!
!
-!
-!
-!
interface Port-channel1
switchport
!
spanning-tree portfast
!
interface GigabitEthernet1/48
-!
-!
media-type rj45
speed auto
duplex auto
channel-group 1 mode desirable
!
interface TenGigabitEthernet1/52
- channel-protocol pagp
- channel-group 1 mode desirable
!
interface Vlan1
ip address 10.133.26.232 255.255.255.0
ip pim dense-mode
!
-!
-!
-!
-!
-!
-!
ip http server
ip pim rp-address 10.133.26.232
!
!
-!
control-plane
!
!
-snmp-server community public RO
-!
-!
line con 0
password 7 01070E05570E15
logging synchronous
password 7 120D0D161E0E1F
login
!
-ntp clock-period 17179594
-ntp server 10.133.26.254
+ntp clock-period 17179537
ntp server 10.133.26.160
+ntp server 10.133.28.160
+ntp server 10.133.28.254
end
-macro name VERSION
-macro description 2.3
-@
+
+!
+! Last configuration change at 12:23:15 UTC Mon Sep 1 2014
+! NVRAM config last updated at 17:38:50 UTC Fri Jul 11 2014
!
version 12.2
no service pad
enable secret 5 $1$OMTZ$xM5SrEPag4m7MGrV1u86/0
!
!
+macro name VERSION
+macro description 2.3
+@
+!
no aaa new-model
ip subnet-zero
no ip domain-lookup
--- /dev/null
+#!/usr/bin/expect
+
+set sub [lrange $argv 0 0]
+if { $sub == "" } { set sub "1" }
+spawn telnet sw1
+
+expect {
+ "Password:" { send "thales\r" }
+ incorrect { send_user "invalid password or account\n"; exit }
+ timeout { send_user "connection to $sub timed out\n"; exit }
+ eof { send_user "connection to host failed\n"; exit }
+}
+expect -exact ">" { send "enable\r" }
+expect "Password:" { send "thales\r" }
+
+expect -exact "#" { send "config terminal\r" }
+
+expect -exact "#" { send "vlan 192\r" }
+expect -exact "#" { send "name Integration\r" }
+expect -exact "#" { send "exit\r" }
+f
+expect -exact "#" { send "interface gigabitEthernet 1/47\r" }
+expect -exact "#" { send "switchport mode access\r" }
+expect -exact "#" { send "switchport access vlan 192\r" }
+expect -exact "#" { send "exit\r" }
+
+expect -exact "#" { send "interface vlan 192\r" }
+expect -exact "#" { send "ip address 192.168.$sub.231 255.255.255.0\r" }
+expect -exact "#" { send "ip pim dense-mode\r" }
+expect -exact "#" { send "no shutdown\r" }
+expect -exact "#" { send "exit\r" }
+
+expect -exact "#" { send "ip route 192.168.$sub.0 255.255.255.0 Vlan192\r" }
+expect -exact "#" { send "ip route 192.168.$sub.160 255.255.255.255 10.133.26.160\r" }
+expect -exact "#" { send "ip route 192.168.$sub.101 255.255.255.255 Vlan10\r" }
+expect -exact "#" { send "ip route 192.168.0.0 255.255.255.0 192.168.$sub.230\r" }
+expect -exact "#" { send "exit\r" }
+
+expect -exact "#" { send "exit\r" }
+
+++ /dev/null
-#!/usr/bin/expect
-
-set sub [lrange $argv 0 0]
-if { $sub == "" } { set sub "1" }
-spawn telnet swg
-
-expect {
- "Password:" { send "thales\r" }
- incorrect { send_user "invalid password or account\n"; exit }
- timeout { send_user "connection to $sub timed out\n"; exit }
- eof { send_user "connection to host failed\n"; exit }
-}
-expect -exact ">" { send "enable\r" }
-expect "Password:" { send "thales\r" }
-
-expect -exact "#" { send "config terminal\r" }
-
-expect -exact "#" { send "vlan 192\r" }
-expect -exact "#" { send "name Integration\r" }
-expect -exact "#" { send "exit\r" }
-
-expect -exact "#" { send "interface gigabitEthernet 1/47\r" }
-expect -exact "#" { send "switchport mode access\r" }
-expect -exact "#" { send "switchport access vlan 192\r" }
-expect -exact "#" { send "exit\r" }
-
-expect -exact "#" { send "interface vlan 192\r" }
-expect -exact "#" { send "ip address 192.168.$sub.231 255.255.255.0\r" }
-expect -exact "#" { send "ip pim dense-mode\r" }
-expect -exact "#" { send "no shutdown\r" }
-expect -exact "#" { send "exit\r" }
-
-expect -exact "#" { send "ip route 192.168.$sub.0 255.255.255.0 Vlan192\r" }
-expect -exact "#" { send "ip route 192.168.$sub.160 255.255.255.255 10.133.28.160\r" }
-expect -exact "#" { send "ip route 192.168.$sub.101 255.255.255.255 Vlan10\r" }
-expect -exact "#" { send "ip route 192.168.0.0 255.255.255.0 192.168.$sub.230\r" }
-expect -exact "#" { send "exit\r" }
-
-expect -exact "#" { send "exit\r" }
-
mydir=$(dirname $0)
[ "$mydir" ] || mydir=.
[[ "$mydir" =~ ^/ ]] || mydir=$(cd $mydir; pwd)
- $mydir/conf_swm_integration.tcl $SUB
+ $mydir/conf_switch_integration.tcl $SUB
fi
# Ajout des depots debian
+++ /dev/null
-#!/bin/bash
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Laurent Mazet
-#
-
-# Date : 10/10/2013
-#
-# 05/11/2013 : LMa configuration des timezone Zulu(GMT) et Paris
-# Desactivation de pam pour ssh
-# ============================================================================
-
-# Switch configuration
-
-# TODO
-# *
-
-MODE_BW=""
-MODE_FIX=""
-MODE_HW=""
-MODE_NET=""
-MODE_TZ=""
-TARBALLS=""
-PROGNAME=$(basename $0)
-VER=1.0
-TMPLOG=/tmp/$PROGNAME-$$.log
-
-# help function
-
-function usage () {
- echo "usage: $PROGNAME <mode>"
- echo " switch trc6500 mode"
- echo " avaliable modes are:"
- echo " - 8MHzMHF, 12MHzDF, 12MHzMDF, 30MHzMDF or 30MHzMHF"
- echo " - fix_ssh"
- echo " - hw_ibm or hw_supermicro"
- echo " - network"
- echo " - tz_zulu or tz_paris"
- exit $@
-}
-
-# formating functions
-
-function title () { echo -e "\033[0;1m$*\033[0;0m"; }
-function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
-function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
-function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
-
-# check command
-
-function check () {
- echo -n "$@: "
- $@ 2>$TMPLOG && pass OK || { fail KO; cat $TMPLOG; exit 1; }
- rm -f $TMPLOG
-}
-
-# argument processing
-
-while [ $# -gt 0 ]; do
- case "$1" in
- -h) usage 0;;
- 8mhz|8MHz|12mhzdf|12MHzDF|12mhzmdf|12MHzMDF|30mhz|30MHz) MODE_BW="${1^^}";;
- fix_ssh) MODE_FIX="$1";;
- hw_ibm|hw_supermicro) MODE_HW="$1";;
- network) MODE_NET="$1";;
- tz_paris|tz_zulu) MODE_TZ="$1";;
- *) usage 1;;
- esac
- shift
-done
-
-# main process
-
-action=""
-
-if [ "$MODE_BW" ]; then
- title "updating /etc/hosts"
- check rm -f /etc/hosts
- check ln -s /etc/hosts.${MODE_BW/MHZ/MHz} /etc/hosts
- TARBALLS+=" root"
- for ip in 0A851{A,C}; do check ln -T -f -s default /opt/tftp/pxelinux.cfg/$ip; done
- case "$MODE_BW" in
- 8MHzMHF)
- #for ip in 0A851{A,C}A{1..2}; do check ln -T -f -s acq /opt/tftp/pxelinux.cfg/$ip; done
- for ip in 0A851{A,C}A5; do check ln -T -f -s rec /opt/tftp/pxelinux.cfg/$ip; done
- ;;
- 12MHzDF) ;;
- 12MHzMDF) ;;
- 30MHzMDF) ;;
- 30MHzMHF)
- for ip in 0A851{A,C}A{1..6}; do check ln -T -f -s acq /opt/tftp/pxelinux.cfg/$ip; done
- for ip in 0A851{A,C}A9; do check ln -T -f -s rec /opt/tftp/pxelinux.cfg/$ip; done
- ;;
- esac
- action="done"
-fi
-
-if [ "$MODE_FIX" ]; then
-
- case "$MODE_FIX" in
- fix_ssh)
- sed -i 's/^\(UsePAM\) yes/\1 no/' /etc/ssh/sshd_config
- TARBALLS+=" root"
-
- action="done"
- esac
-
-fi
-
-if [ "$MODE_HW" ]; then
-
- conf=/etc/default/shutdownallblades
-
- title "change shutdownallblades"
- if $(grep -sq '^#*REBOOT=' $conf); then
- case "$MODE_HW" in
- hw_ibm) check sed -i 's/^#*REBOOT=.*$/#REBOOT=yes/' $conf;;
- hw_supermicro) check sed -i 's/^#*REBOOT=.*$/REBOOT=yes/' $conf;;
- esac
- else
- case "$MODE_HW" in
- hw_ibm) check sed -i '$a#REBOOT=yes' $conf;;
- hw_supermicro) check sed -i '$aREBOOT=yes' $conf;;
- esac
- fi
-
- action="done"
-fi
-
-if [ "$MODE_NET" ]; then
-
- conf=/etc/dhcp/dhcpd.conf
-
- title "update network configuraton"
- if $(grep -sq 'trc[0-9]*_1' $conf); then
- check sed -i 's/\(host.*trc[0-9][0-9]\)\([^_]\)/\1-rf\2/;s/\(host.*trc[0-9][0-9]\)_1/\1/' $conf
- fi
- TARBALLS+=" root"
-
- action="done"
-fi
-
-if [ "$MODE_TZ" ]; then
- case "$MODE_TZ" in
- tz_paris) TZ="Europe/Paris";;
- tz_zulu) TZ="Etc/Zulu";;
- *) TZ="";;
- esac
-
- if [ "$TZ" ]; then
- echo $TZ > /etc/timezone
- TARBALLS+=" root"
-
- action="done"
- fi
-fi
-
-# last check
-[ "$action" ] || { echo "no mode specified"; exit 1; }
-
-[ "$TARBALLS" ] && make -f /opt/cluster/Makefile $TARBALLS
-
-# vim:set tabstop=4 expandtab shiftwidth=4:
+++ /dev/null
-#!/bin/bash
-#
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Alexandre Cazalis
-#
-# Gestion attente lames esclaves au boot (ping,ssh)
-#
-# 2013-11-20 : V1.2 LMa
-# - Ajout de la personalisation de la commande a executer
-# par defaut (uptime). Ajout attente montage nfs avant demarrage
-# 2014-05-28 : V1.3 LMa
-# - Ajout d'un mode foreground pour ne tenter qu'une fois chaque commande
-# - Ajout d'une commande pour exclude la lame maitre
-#
-# 2014-10-28 : Change owner
-# ============================================================================
-
-# TODO
-# *
-
-CMD="uptime"
-MODE="iter"
-PROGNAME=$(basename $0)
-VER=1.3
-EXCLUDE="___"
-
-function usage () {
- echo "usage: $PROGNAME [-c command] [-h] [-i] [-o] [-t seconds] [-v] [-w] [-x] host1 host2..."
- echo " -c: set command (default '$CMD')"
- echo " -h: help message"
- echo " -i: infinity loop mode [default]"
- echo " -o: only try ones"
- echo " -t: timeout"
- echo " -v: version message"
- echo " -w: wait mode"
- echo " -x: avoid master blade"
- exit $@
-}
-
-while [ $# -gt 0 ]; do
- case "$1" in
- -c) shift; CMD=$1;;
- -h) usage 0;;
- -i) MODE="iter";;
- -o) MODE="ones";;
- -t) shift; [[ "$1" =~ [^0-9] ]] && { echo "incorrect timeout ($1)"; exit 1;}; TIMEOUT=$1;;
- -v) echo "$PROGNAME: version $VER"; exit;;
- -w) MODE="wait";;
- -x) EXCLUDE="trc00";;
- *) list+=" "$1;;
- esac
- shift
-done
-
-# list
-[ "$list" ] || list=$(awk '{sub(/#.*/, "")} /trc[0-9][0-9]/ && ! /-rf/ {print $2}' /etc/hosts)
-list=$(echo $list" "|sed s/$EXCLUDE//)
-
-# timeout
-if [ "$TIMEOUT" ]; then
- trap "echo 'timeout expired (${TIMEOUT}s)'; exit 0;" SIGVTALRM
- ( sleep $TIMEOUT; kill -SIGVTALRM $$ 2>/dev/null; [ $? -eq 0 ] && rc=1 || rc=0; exit $rc) &
-fi
-trap "exit 0;" SIGINT
-
-# main loop
-while true; do
- for host in $list; do
- stat=0
- echo -n ${host}:" "
- ping -c 1 $host >&/dev/null && { ssh -t -o ConnectTimeout=1 root@$host "$CMD" 2>/dev/null && stat=1 || echo "soon..."; } || echo
- [ "$MODE" = "wait" -a $stat -eq 1 ] && list=${list/$host }
- done
- [ "$MODE" = "ones" ] && break;
- [[ "$list" =~ [a-zA-Z0-9_-] ]] && sleep 1 || break;
-done
+++ /dev/null
-#!/bin/bash
-
-# parameters
-#
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Laurent Mazet
-#
-# 2013-11-10 V1.0 : Creation
-#
-# 2013-11-20 V1.1 : L.Mazet ajout possibilite de configuration du switch
-#
-# ============================================================================
-
-DRY=
-ID=
-IP=192.168.0.1
-#TRC6500_SCRIPT_DIR=/opt/trc6500/script
-TRC6500_SCRIPT_DIR=$(dirname $0)
-
-# help function
-
-function usage () {
- echo "usage: $PROGNAME [-a] [-d] [-h] [-i <id>]"
- echo " -a: configure all boards"
- echo " -d: dry mode"
- echo " -h: help message"
- echo " -i: board id (from 1 to 5)"
- exit $@
- }
-
-# formating functions
-
-function title () { echo -e "\033[0;1m$*\033[0;0m"; }
-function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
-function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
-function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
-
-# configuration values
-
-# argument processing
-
-while [ $# -gt 0 ]; do
- case "$1" in
- -a) ID=all;;
- -d) DRY=yes;;
- -h) usage 0;;
- -i) shift; ID=$1;;
- *) usage 1;;
- esac
- shift
-done
-
-# switch port configure function ()
-
-function sw_configure () {
- case "$1" in
- off) CMD="-c 'configure terminal' -c 'interface range g1/39-44' -c 'shutdown' -c end -c 'clear mac address-table dynamic' -c 'clear ip arp inspection log' -c exit";;
- on) CMD="-c 'configure terminal' -c 'interface range g1/39-44' -c 'no shutdown' -c end -c exit";;
- 1) CMD="-c 'configure terminal' -c 'interface g1/39' -c 'no shutdown' -c end -c exit";;
- 2) CMD="-c 'configure terminal' -c 'interface g1/40' -c 'no shutdown' -c end -c exit";;
- 3) CMD="-c 'configure terminal' -c 'interface g1/41' -c 'no shutdown' -c end -c exit";;
- 4) CMD="-c 'configure terminal' -c 'interface g1/42' -c 'no shutdown' -c end -c exit";;
- 5) CMD="-c 'configure terminal' -c 'interface g1/43' -c 'no shutdown' -c end -c exit";;
- 6) CMD="-c 'configure terminal' -c 'interface g1/44' -c 'no shutdown' -c end -c exit";;
- esac
-
- if [ "$DRY" = "yes" ]; then
- echo connect_switch.tcl -h swm $CMD
- else
- LOG=/tmp/$PROGNAME-$$.log
- echo -n "sw_configure $1: "
- eval $TRC6500_SCRIPT_DIR/connect_switch.tcl $CMD swm >&$LOG && pass OK || { fail KO; cat $LOG; exit 1; }
- rm -f $LOG
- fi
-}
-
-case "$ID" in
-1) CH1=0; CH2=1; CLOCKREF=external;;
-2) CH1=2; CH2=3; CLOCKREF=internal;;
-3) CH1=4; CH2=5; CLOCKREF=internal;;
-4) CH1=6; CH2=7; CLOCKREF=internal;;
-5) CH1=8; CH2=9; CLOCKREF=internal;;
-6) CH1=10; CH2=11; CLOCKREF=internal;;
-all)
- for id in $(seq 1 5); do
- title "switch off all fe306 ports"
- sw_configure off
- title "switch on port for fe306 $id"
- sw_configure $id
- title "configure fe306 $id"
- if [ "$DRY" = "yes" ]; then
- echo $(basename $0) -i $id
- else
- { $0 -i $id | mawk -W interactive '{print " " $0}'; } && pass OK || { fail KO; exit 1; }
- fi
- done
- title "switch on all fe306 ports"
- sw_configure on
- exit 0
- ;;
-*) echo "unknown fe306 id ($ID)"; exit 1;;
-esac
-
-# configure function
-
-function configure () {
- echo -n "$1 [$2 <= $3]: "
- if [ "$DRY" = "yes" ]; then
- echo wget -q -O - http://$IP/$1?$2=$3
- else
- wget -q -O - http://$IP/$1?$2=$3 >/dev/null && pass OK || { fail KO; exit 1; }
- fi
-}
-
-# setup local address
-
-title "setup local address"
-cmd="ifconfig eth1:1 192.168.0.2 netmask 255.255.255.0"
-[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd && pass OK || { fail KO; exit 1; }; }
-
-# check if fe306 is connected
-
-#title "check presence of $IP"
-#cmd="ping -c 1 -w 10 -W 10 $IP"
-#[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd >&/dev/null && pass OK || { warn KO; ifconfig eth1:1 down; exit 0; }; }
-
-# get serial number
-
-[ "$DRY" = "yes" ] && SN=00 || \
- SN=$(wget -q -O - http://$IP/versions_en.html | mawk '/MODULE/ { module = 1 } /Serial Number/ { if (module) { printf "%02X", $4; exit 0 } }')
-
-[[ "$SN" =~ ^[0-9A-F][0-9A-F]$ ]] || { echo "unknown serial number ($SN)"; exit 1; }
-
-# configure ip
-
-title "configure ip"
-
-configure ModeServ.cmd serv_mode MANUAL
-configure MacServ.cmd serv_mac 00.80.EE.00.$SN.01
-configure IpServ.cmd serv_ip 10.133.26.1${ID}0
-configure MaskServ.cmd serv_mask 255.255.255.0
-
-for i in $(seq 1 8); do
- configure MacProd$i.cmd prod_mac$i 00.80.EE.00.$SN.0$((i+1))
- configure IpProd$i.cmd prod_ip$i 10.133.26.1$ID$i
-done
-
-configure IpMulticast.cmd multicast_ip 238.0.0.0
-configure RxMulticast.cmd multicast_rx 62002
-configure TxMulticast.cmd multicast_tx 62004
-configure TTL.cmd ttl 10
-
-# configure gps
-
-title "configure gps"
-
-configure GpsRate.cmd gps_rate 19200
-configure GpsChar.cmd gps_char 8
-configure GpsStop.cmd gps_stop 1
-configure GpsParity.cmd gps_parity no
-
-# configure miscellaneous
-
-title "configure miscellaneous"
-configure BoardNum.cmd board_num $ID
-configure RackNum.cmd rack_num 1
-configure Chan1Num.cmd channel1_num $CH1
-configure Chan2Num.cmd channel2_num $CH2
-
-configure FpgaLoc.cmd fpga_loc FLASH
-configure Clk10Mhz.cmd clk_10 $CLOCKREF
-configure PllConfig.cmd pll_cfg pll_cfg_02
-
-# unset local address
-
-title "unset local address"
-cmd="ifconfig eth1:1 down"
-[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd && pass OK || { fail KO; exit 1; }; }
-
-# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
+++ /dev/null
-#!/usr/bin/expect
-
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-#
-# * V1.0 Laurent Mazet 29/04/2013
-# creation script de configuration de la matrice par ligne de commande
-# ============================================================================
-
-spawn /opt/trc6500/tools/matrix_tool
-
-set timeout 3
-
-exec ifconfig eth1:0 192.168.1.1 netmask 255.255.255.0
-
-proc cleanexit {rc} {
- exec ifconfig eth1:0 down
- exit $rc
-}
-
-expect {
- "taper la commande choisie" { send "0\r" }
- timeout { send_user "connection to $host timed out\n"; cleanexit 1 }
- eof { send_user "connection to host failed\n"; cleanexit 1 }
-}
-expect {
- "timeout detected" { send_user "can't connect on defaut ip\n"; cleanexit 1 }
- "taper la commande choisie" { send "10\r" }
-}
-
-expect "nouvelle adresse" { send "010.133.026.253\r" }
-
-expect "taper la commande choisie" { send "12\r" }
-
-expect "taper la commande choisie" { send "14\r" }
-
-cleanexit 0
-# vim:set tabstop=4 expandtab shiftwidth=4:
+++ /dev/null
-#!/usr/bin/expect
-
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Laurent Mazet
-#
-# Script de configuration du switchs
-#
-# 2013-10-10 V1.0 : Creation
-#
-# ============================================================================
-
-set host [lrange $argv 0 0]
-if { $host == "" } {
- puts "usage: configure_switch.tcl \[swg1|swg2|swm\]"
- exit 1
-}
-
-set tftpserver ""
-if { $host == "swg1" } { set tftpserver "10.133.26.160" }
-if { $host == "swg2" } { set tftpserver "10.133.26.160" }
-if { $host == "swm" } { set tftpserver "10.133.28.160" }
-if { $host == "sw1" } { set tftpserver "10.133.26.160" }
-if { $host == "sw2" } { set tftpserver "10.133.26.160" }
-if { $tftpserver == "" } { puts "unknown switch '$host'"; exit }
-
-set date [ exec date +%Y%m%d-%H:%m:%S ]
-set backup "$host-$date.txt"
-
-spawn telnet $host
-
-set timeout 30
-
-expect {
- "Password:" { send "thales\r" }
- incorrect { send_user "invalid password or account\n"; exit 1 }
- timeout { send_user "connection to $host timed out\n"; exit 1 }
- eof { send_user "connection to host failed\n"; exit 1 }
-}
-expect -exact ">" { send "enable\r" }
-expect "Password:" { send "thales\r" }
-expect "#" { send "copy running-config tftp://$tftpserver/$backup\r" }
-expect -exact "?" { send "$tftpserver\r" }
-expect -exact "?" { send "$backup\r" }
-expect "#" { send "copy tftp://$tftpserver/$host.txt startup-config\r" }
-expect -exact "?" { send "startup-config\r" }
-#expect "#" { send_user " << reload or exit ? >> "; interact }
-expect "#" { send "reload\r" }
-
-exit 0
-# vim:set tabstop=4 expandtab shiftwidth=4:
+++ /dev/null
-#!/usr/bin/expect
-
-set host [lrange $argv 0 0]
-if { $host == "" } {
- puts "usage: configure_switch_bootstrap.tcl \[swg1|swg2|swm\]"
- exit 1
-}
-
-set ipaddress ""
-if { $host == "swg1" } { set ipaddress "10.133.26.231" }
-if { $host == "swg2" } { set ipaddress "10.133.26.232" }
-if { $host == "swm" } { set ipaddress "10.133.28.231" }
-if { $host == "sw1" } { set ipaddress "10.133.26.231" }
-if { $host == "sw2" } { set ipaddress "10.133.26.232" }
-if { $ipaddress == "" } { puts "unknown switch '$host'""; exit 1 }
-
-spawn screen -c . /dev/ttyUSB0
-
-set timeout 5
-
-set state 0
-while { $state != 1 } {
- expect {
- timeout { send "\r" }
- -exact ">" { send "enable\r" }
- "#" { set state 1 }
- "Password:" { send "thales\r" }
- eof { send_user "connection to host failed\n"; exit 1 }
- }
-}
-
-send "configure terminal\r"
-expect "#" { send "interface vlan 1\r" }
-expect "#" { send "ip address $ipaddress 255.255.255.0\r" }
-expect "#" { send "exit\r" }
-expect "#" { send "line vty 0 4\r" }
-expect "#" { send "password thales\r" }
-expect "#" { send "enable password thales\r" }
-expect "#" { send "end\r" }
-
-# quit switch connection
-expect "#" { send "exit\r" }
-
-# to quit screen we need to send C-a \.
-send "\001\\"
-expect "kill all your windows" { send "y\r" }
-
-exit 0
-# vim:set tabstop=4 expandtab shiftwidth=4:
+++ /dev/null
-#!/usr/bin/expect
-
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Laurent Mazet
-#
-# Script de connection au switchs
-#
-# 2013-10-10 V1.0 : Creation
-#
-# 2014-03-05 V1.1 : LMa ajout de passage de commande CISCO en parametre
-#
-# 2014-06-10 V1.2 : LMa ajout d'un fichier de commandes
-#
-# ============================================================================
-
-# default value
-set adminpassword "thales"
-set cmd {}
-set host ""
-set loginpassword "thales"
-set prompt "SW*"
-
-proc usage {rc} {
- puts "usage: connect_switch.tcl \[host\] \[-a adminpassword\] \[-c command\] \[-f file\] \[-h\] \[-l loginpassword\] \[-p prompt\]"
- exit $rc
-}
-
-# process argument
-set action ""
-for {set i 0} {$i < [llength $argv]} {incr i} {
- set arg [lindex $argv $i]
- switch $arg {
- -a { set action "-adminpassword" }
- -c { set action "-cmd" }
- -f { set action "-file" }
- -h { usage 0 }
- -l { set action "-loginpassword" }
- -p { set action "-prompt" }
- default {
- switch $action {
- -adminpassword { set adminpassword $arg }
- -cmd { set cmd [lappend cmd $arg] }
- -file {
- if {[file isfile $arg] == 1} then {
- set f [open $arg "r"]
- set data [read $f]
- close $f
- foreach line [split $data "\n"] {
- set cmd [lappend cmd $line]
- }
- } else {
- puts "can't open file '$arg'"
- exit 1
- }
- }
- -loginpassword { set loginpassword $arg }
- -prompt { set prompt $arg }
- default { set host $arg }
- }
- set action ""
- }
- }
-}
-if {$action != ""} {
- puts "missing arguments"
- exit 1
-}
-if { $host == "" } {
- usage 1
-}
-
-# start connection
-spawn telnet $host
-
-# login password
-expect {
- "Password:" { send "$loginpassword\r" }
- timeout { send_user "connection to host failed\n"; exit 1 }
- eof { send_user "connection to host failed\n"; exit 1 }
-}
-
-# admin password
-expect {
- "$prompt>" { send "enable\r" }
- timeout { send_user "connection to host failed\n"; exit 1 }
- "Password:" { send_user "invalid login password\n"; exit 1 }
-}
-expect "Password:" { send "$adminpassword\r" }
-expect {
- "$prompt#" { send "\r" }
- "Password:" { send_user "invalid admin password\n"; exit 1 }
-}
-
-# commands or interactive mode
-if {[llength $cmd] == 0 } {
- expect "$prompt#" { interact }
-} else {
- expect "$prompt#" { send "terminal length 0\r" }
- for {set i 0} {$i < [llength $cmd]} {incr i} {
- expect {
- "$prompt#" { send "[lindex $cmd $i]\r" }
- "confirm" { send "\r"; continue }
- }
- }
- expect {
- "confirm" { send "\r"; expect "$prompt" { send "exit\r" } }
- "$prompt" { send "exit\r" }
- }
- send_user "\n"
-}
-
-exit 0
-# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
+++ /dev/null
-#!/bin/bash
-
-# parameters
-#
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Laurent Mazet
-#
-# 2014-10-06 V1.0 : Creation
-#
-# ============================================================================
-
-DRY=
-FIRMWARE=/opt/trc6500/config/code_metier/libHwCtrl/Bitstream
-LIST="application.out production.bin ts12_fp_pano.bin ts22_fp_pano.bin firmware.out"
-HOST=
-#TRC6500_SCRIPT_DIR=/opt/trc6500/script
-TRC6500_SCRIPT_DIR=$(dirname $0)
-
-# help function
-
-function usage () {
- echo "usage: $PROGNAME [-d] [-f dir] [-h] [-i host] [-l list]"
- echo " -d: dry mode"
- echo " -f: firmware directory ($FIRMWARE)"
- echo " -h: help message"
- echo " -i: board hostname (or ip)"
- echo " -l: list of firmware ($LIST)"
- exit $@
- }
-
-# formating functions
-
-function title () { echo -e "\033[0;1m$*\033[0;0m"; }
-function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
-function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
-function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
-
-# argument processing
-
-while [ $# -gt 0 ]; do
- case "$1" in
- -d) DRY=yes;;
- -f) shift; FIRMWARE=$1;;
- -h) usage 0;;
- -i) shift; HOST=$1;;
- -l) shift; LIST=$1;;
- *) usage 1;;
- esac
- shift
-done
-
-# check host
-
-[ "$HOST" ] || ping -c 1 $HOST >&/dev/null || \
- { fail "Can't connect '$HOST'"; exit 1; }
-
-# check firmware
-
-for f in $LIST; do
- [ -f $FIRMWARE/$f ] || { fail "Can't find '$FIRMWARE/$f'"; exit 1; }
-done
-
-# check mode
-
-protect=""
-[ "$DRY" = yes ] && protect="!echo"
-
-# flash firmware
-
-title "flash fe306 '$HOST'"
-
-ftp -n <<EOF
-open $HOST
-quote USER none
-quote PASS none
-binary
-cd flash
-$(for f in $LIST; do echo "$protect send $FIRMWARE/$f"; done)
-bye
-EOF
-
-# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
+++ /dev/null
-#!/usr/bin/expect
-
-# ============================================================================
-#
-# Copyright (C) THALES. All rights reserved
-# Author: Laurent Mazet
-#
-# Script de connection au switchs
-#
-# 2014-10-06 V1.0 : Creation
-#
-# ============================================================================
-
-# default value
-set blade {0}
-set host ""
-set login "admin"
-set password "thalescom02"
-set prompt "system>"
-
-proc usage {script_name rc} {
- puts "usage: [exec basename $script_name] \[host\] \[-b blade\] \[-h\] \[-l login\] \[-p password\] \[-x prompt\]"
- exit $rc
-}
-
-# process argument
-set action ""
-for {set i 0} {$i < [llength $argv]} {incr i} {
- set arg [lindex $argv $i]
- switch $arg {
- -b { set action "-blade" }
- -h { usage $argv0 0 }
- -l { set action "-login" }
- -p { set action "-password" }
- -x { set action "-prompt" }
- default {
- switch $action {
- -blade { set blade $arg }
- -login { set login $arg }
- -password { set password $arg }
- -prompt { set prompt $arg }
- default { set host $arg }
- }
- set action ""
- }
- }
-}
-if {$action != ""} {
- puts "missing arguments"
- exit 1
-}
-if { $host == "" } {
- usage $argv0 1
-}
-
-# start connection
-spawn telnet $host
-
-# login
-expect {
- "username:" { send "$login\r" }
- timeout { send_user "connection to host failed\n"; exit 1 }
- eof { send_user "connection to host failed\n"; exit 1 }
-}
-
-
-# password
-expect {
- "password:" { send "$password\r" }
- timeout { send_user "connection to host failed\n"; exit 1 }
- eof { send_user "connection to host failed\n"; exit 1 }
-}
-
-expect {
- "$prompt" { send "mt -b $blade\r" }
- "username:" { send_user "connection to host failed\n"; exit 1 }
-}
-
-expect {
- "OK" { send "exit\r" }
- "$prompt" { send_user "error\n"; exit 1 }
-}
-
-send_user "\n"
-exit 0
-# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
+++ /dev/null
-# -*- Makefile -*-
-
-DIR = master-files/
-
-CONFIGDIR = debian/
-
-FILES = $(shell cd $(DIR); find etc/ -type f)
-
-TARGET = $(MODULE)_$(VERSION)_$(ARCH).deb
-
-OBJECTS = deb/DEBIAN/preinst \
- deb/DEBIAN/postrm \
- deb/DEBIAN/postinst \
- deb/opt/trc6500/script
-
-SHELL=/bin/bash
-MODULE = trc6500-master-files
-ARCH = all
-
-.DEFAULT: all
-.PHONY: clean deb all
-
-VERSION = $(shell awk '/^$(MODULE)/ { gsub(/[()]/, ""); print $$2; exit }' debian/debian-changelog)
-
-
-all: $(TARGET) deb
-
-clean:
- rm -rf deb $(OBJECTS) $(TARGETS)
-
-deb:
- rm -rf deb
- mkdir --parent deb/etc/webconfig/ deb/etc/default/ deb/DEBIAN
-
-deb/DEBIAN/preinst: debian/debian-preinst deb $(addprefix $(DIR)/, $(FILES)) $(MAKEFILE_LIST)
- rm -f $@
- cat $< > $@~
- for f in $(FILES); do echo '[ -f "/'$$f'" ] && dpkg-divert --add /'$$f; done >>$@~
- echo "exit 0" >>$@~
- chmod +x $@~
- mv $@~ $@
-
-deb/DEBIAN/postrm: debian/debian-postrm deb $(addprefix $(DIR)/, $(FILES)) $(MAKEFILE_LIST)
- rm -f $@
- cat $< > $@~
- for f in $(FILES); do echo '[ -f "/'$$f'" ] && dpkg-divert --remove /'$$f; done >>$@~
- echo "exit 0" >>$@~
- chmod +x $@~
- mv $@~ $@
-
-deb/DEBIAN/postinst: debian/debian-postinst deb
- cp $< $@
-
-deb/opt/trc6500/script: ../additional_scripts deb
- mkdir -p deb/opt/trc6500/script/
- cp ../additional_scripts/* deb/opt/trc6500/script/
-
-$(TARGET): deb $(OBJECTS)
- sed s/@@version@@/$(VERSION)/ debian/debian-control > deb/DEBIAN/control
- mkdir -p deb/usr/share/doc/$(MODULE)
- cp debian/debian-changelog deb/usr/share/doc/$(MODULE)/changelog
- cp -r $(DIR)/* deb/
- fakeroot dpkg --build deb
- mv deb.deb $@
+++ /dev/null
-trc6500-master-files (7.8.1-1) unstable; urgency=low
-
- * .deb packaging
-
- -- Olivier Leobal <olivier.leobal@thalesgroup.com> Wed, 10 Jun 2015 14:16:08 +0200
-
-trc6500-master-files (7.8.0-1) unstable; urgency=low
-
- * initial release (#1337)
- * added scripts from lgcore
- * getswitchtemp fix
- * inetd removal
-
- -- Olivier Leobal <olivier.leobal@thalesgroup.com> Wed, 10 Jun 2015 12:46:08 +0200
+++ /dev/null
-Section: TRC6500
-Priority: important
-Version: @@version@@
-Architecture: all
-Package: trc6500-master-files
-Maintainer: Olivier Léobal <olivier.leobal@thalesgroup.com>
-Description: files for the TRC6500's computing cluster's operating system
- Contains mainly scripts and configuration files
-Homepage: http://www.thalesgroup.com/
+++ /dev/null
-#!/bin/bash
-
-# since equivs can't handle symlinks, here we are doing them by hand. As of writing this script (2015-05-29), there are 11 symlinks to take care of.
-
-# I don't know why things were that way before, but I'm told to set them that way again.
-echo 'Moving things around..'
-[ -d /home ] && mv /home /var/media/backup
-mkdir -p /var/media/backup/dump/{core,dump_delay_line,dump_track_base,log,prod,rec,trace}
-ln -s /var/media/backup/dump /dump
-ln -s /var/media/backup/home /home
-ln -s /var/media/backup/rec /rec
-ln -s /var/media/prod /var/media/backup/prod
-ln -s /etc/hosts.30MHzMDF /etc/hosts.30MHz
-ln -s /etc/hosts.8MHzMHF /etc/hosts.8MHz
-ln -s /usr/lib/syslinux/menu.c32 /opt/tftp/menu.c32
-ln -s /initrd.img /opt/tftp/initrd.img
-ln -s /vmlinuz /opt/tftp/vmlinuz
-ln -s /usr/lib/syslinux/pxelinux.0 /opt/tftp/pxelinux.0
-ln -s /usr/lib/syslinux/memdisk /opt/tftp/memdisk
-echo 'Things moved.'
-
-# now enable all the scripts and such..
-echo 'Enabling on-startup scripts..'
-update-rc.d waitswitches defaults
-update-rc.d waitswitches enable
-update-rc.d etherwake defaults
-update-rc.d etherwake enable
-update-rc.d ipmiwake defaults
-update-rc.d ipmiwake enable
-update-rc.d wakeonlan defaults
-update-rc.d wakeonlan enable
-update-rc.d waitslaves defaults
-update-rc.d shutdownallblades defaults
-update-rc.d checkudevrules enable
-update-rc.d checkudevrules defaults
-echo 'Scripts enabled.'
-
-# and these other things too
-echo 'Finalizing configuration..'
-chown webconfig /etc/webconfig/alias.csv /etc/dhcp/dhcpd.conf*
-cp /etc/dhcp/dhcpd.conf.blank /etc/dhcp/dhcpd.conf
-chsh -s /usr/bin/pdmenu trc6500
-
-# from that sync_master.sh script.. Apparently there from Git shenanigans.
-chmod go-rwx /root/.ssh/id_rsa
-chmod go-rwx /opt/cluster/slave/root/.ssh
-chmod go-rwx /opt/cluster/slave/root/.ssh/id_rsa
-chmod a+rwx /opt/tftp
-
-echo "">/var/log/atftpd.log
-chown nobody /var/log/atftpd.log
-
-update-initramfs -u
-
-cd /opt/cluster
-# now this file is locked away during install and replaced by a dummy. So we put a duplicate of this in a script executed on first boot after the install.
-# this is still here because it is planned we install/update this on established systems
-[ -f /sbin/start-stop-daemon.REAL ] || make all
-echo 'Finalized.'
-
-
+++ /dev/null
-#!/bin/sh
-
-# list of diverts
+++ /dev/null
-#!/bin/bash
-
-# list of diverts
+++ /dev/null
-../../master/
\ No newline at end of file
+++ /dev/null
-This puts things and thongs together to get us a makeshift Debian package. Copied from the same in lgcore6500(git repo)/dev/services/webconfig. Use with caution.
-
-
-** How to use
-
-edit things in /debian, notably the control file
-
-edit the Makefile to include the files you want to include (ie, here, the master-files directory which is simply the "master" folder in the debian6500 git repo, without the symlinks)
-
-pray "make" will do the job
-
-
-** What files we need
-
-Everything in the debian/ folder, ie control, preinst, postinst and the like.
-Obviously they are not required for a _debian_ package but for _ours_ they are
-
-the ../additional_scripts folder. Please, please don't trash it away. These scripts come from the lgcore6500 repository, that's why they're no symlinks like for the master-files thing.
-
-
-** About versioning
-
-Let us say our package is version 7.8.1-1. This means it's the version 1 of the customization archive for Debian 7.8, hence 7.8.1. The -1 suffix is a package version, in theory it doesn't affect the contents, only how they're packaged.
-
-That's for version number. Remember also to list your changes in the debian-changelog in the debian/ folder ; it'll be useful to check the OS version on systems once it's installed.
# now we unpack our master archive and replace all those conf files and scripts and things
echo 'Unpacking master config files..'
-dpkg -i /media/cdrom/simple-cdd/trc6500-master-files* # version-proof
+dpkg -i /media/cdrom/simple-cdd/trc6500-master-file* # version-proof
chown root /etc/cron.d/getswitchtemp
chown root /root/bin/get_switch_temperature
echo 'Files unpacked.'
d-i netcfg/get_domain string thalesgroup.com
# it seems domain preseeding does not work (there are bug reports on the internet..). In theory we're not using it though.
d-i netcfg/get_nameservers string
-d-i netcfg/get_ipaddress string 10.133.28.160
+d-i netcfg/get_ipaddress string 10.133.26.160
d-i netcfg/get_netmask string 255.255.255.0
-d-i netcfg/get_gateway string 10.133.28.231
+d-i netcfg/get_gateway string 10.133.26.231
# no DNS server
# Important note : most if not all of the net config will get replaced anyway as we unpack /master into the drive.
+++ /dev/null
-** Introduction
-
-This uses the simple-cdd package (available on the official Debian repository) to create a custom install CD for the master blade of the TRC6500 system's computing cluster. A number of components are installed automatically (either during install or on first boot) ; the CD also includes useful files for subsequent configuration.
-
-
-** What the built CD includes
-
-- a selection of useful/required packages
-- a selection of custom packages scarcely available elsewhere
-- unpacking of config files and scripts during install
-- automatic execution of some configuration options
-
-This CD does NOT create an usable operating system. All included systems should be reviewed, but particularly the network configuration (/etc/hosts, DHCP config, TFTP config..), which is partly automated thanks to scripts provided by the TRC6500 exploitation software, which is NOT bundled with this CD.
-
-
-** What files we'll be using
-
-- simple-cdd.conf (name is clear enough) should be passed to the build-simple-cdd program
-- the entire profiles/ directory is used by build-simple-cdd
-- myrc.local is the script executed on first boot
-- the local_packages/ directory contains packages not available on the regular repository, or more recent versions of packages available there.
-- the additional_scripts/ directory contains useful scripts included in the trc6500-master-files deb archive, in the /opt/trc6500/script/ folder.
-- the deb_build/ folder contains the necessary stuff to build the trc6500-master-files deb package which contains a collection of scripts, config files and config instructions
-- TRC6500.pub is a GPG public key added to the OS's keyring during install, corresponding to a makeshift Debian repo from T. Pérennou
-- splash-thales.png is a 640*480 image used for the splashscreen
-
-
-** How build-simple-cdd works
-
-The build-simple-cdd program is to be called like this :
-build-simple-cdd --dist wheezy --conf ./simple-cdd.conf
-
-Most options described in the documentation are included in the simple-cdd.conf file. The program will use those (in addition to the default settings) to build a list of what is to be included on the CD. Primarily, it includes itself, profile(s) scripts, and pulls packages (from the <profile>.packages list) from whatever repositories are in /etc/apt/sources.list, or from the ./tmp folder if the packages have already been fetched.
-
-Additional packages are to be put in the local_packages directory (which is specified in our own simple_cdd.conf). It should be noted that packages placed there simply join the pool of available packages : to actually include them on the CD, they should be added in an itself included profile's packages list (say, profiles/trc6500.packages). The list of packages added this way is :
-cpumon dce firmware-bnx2 libcalloc1 libcycle1 libdebug1 libmcore1 raf swb webconfig xcfe
-
-Additional files are included with the all_extras="<path>,<path>" option in our simple-cdd.conf file.
-
-You should look into the provided simple-cdd.conf file ! It is tailored to a quite specific use case, and making your own should be easy enough since the simple-cdd package contains a detailed config file.
-
-
-** Building the trc6500-master-files deb packages
-
-This package has been put together in replacement of an earlier tarball ; the main benefit to using a deb being easier upgrade of existing systems.
-
-Check out the deb_build/ folder to learn more ; most of it is done by the Makefile.
-
-
-** Regarding install vectors
-
-To set up a bootable USB key :
-cp <iso file> /dev/<key> && sync
-<key> should be the device, not a partition of it. The key will get partitioned like the CD (and how the CD is partitioned is a whole other topic).
-
-To burn your ISO to a CD :
-xorriso -as cdrecord -v dev=/dev/sr0 blank=as_needed <iso file>
-
-
-** Additional documentation
-/usr/share/simple-cdd
-/usr/share/doc/simple-cdd
-/usr/share/doc/installation-guide-amd64 (talks about preseeds)
-
--- /dev/null
+** Introduction
+
+This uses the simple-cdd package (available on the official Debian repository) to create a custom install CD for the master blade of the TRC6500 system's computing cluster. A number of components are installed automatically (either during install or on first boot) ; the CD also includes useful files for subsequent configuration.
+
+
+** What the built CD includes
+
+- a selection of useful/required packages
+- a selection of custom packages scarcely available elsewhere
+- unpacking of config files and scripts during install
+- automatic execution of some configuration options
+
+This CD does NOT create an usable operating system. All included systems should be reviewed, but particularly the network configuration (/etc/hosts, DHCP config, TFTP config..), which is partly automated thanks to scripts provided by the TRC6500 exploitation software, which is NOT bundled with this CD.
+
+
+** What files we'll be using
+
+- simple-cdd.conf (name is clear enough) should be passed to the build-simple-cdd program
+- the entire profiles/ directory is used by build-simple-cdd
+- myrc.local is the script executed on first boot
+- the local_packages/ directory contains packages not available on the regular repository, or more recent versions of packages available there.
+- the deb_build/ folder contains the necessary stuff to build the trc6500-master-files deb package which contains a collection of scripts, config files and config instructions
+- TRC6500.pub is a GPG public key added to the OS's keyring during install, corresponding to a makeshift Debian repo from T. Pérennou
+- splash-thales.png is a 640*480 image used for the splashscreen
+
+
+** How build-simple-cdd works
+
+The build-simple-cdd program is to be called like this :
+build-simple-cdd --dist wheezy --conf ./simple-cdd.conf
+
+Most options described in the documentation are included in the simple-cdd.conf file. The program will use those (in addition to the default settings) to build a list of what is to be included on the CD. Primarily, it includes itself, profile(s) scripts, and pulls packages (from the <profile>.packages list) from whatever repositories are in /etc/apt/sources.list, or from the ./tmp folder if the packages have already been fetched.
+
+Additional packages are to be put in the local_packages directory (which is specified in our own simple_cdd.conf). It should be noted that packages placed there simply join the pool of available packages : to actually include them on the CD, they should be added in an itself included profile's packages list (say, profiles/trc6500.packages). The list of packages added this way is :
+cpumon dce firmware-bnx2 libcalloc1 libcycle1 libdebug1 libmcore1 raf swb webconfig xcfe
+
+Additional files are included with the all_extras="<path>,<path>" option in our simple-cdd.conf file.
+
+You should look into the provided simple-cdd.conf file ! It is tailored to a quite specific use case, and making your own should be easy enough since the simple-cdd package contains a detailed config file.
+
+
+** Building the trc6500-master-files deb packages
+
+This package has been put together in replacement of an earlier tarball ; the main benefit to using a deb being easier upgrade of existing systems.
+
+Check out the deb_build/ folder to learn more ; most of it is done by the Makefile.
+
+
+** Regarding install vectors
+
+To set up a bootable USB key :
+cp <iso file> /dev/<key> && sync
+<key> should be the device, not a partition of it. The key will get partitioned like the CD (and how the CD is partitioned is a whole other topic).
+
+To burn your ISO to a CD :
+xorriso -as cdrecord -v dev=/dev/sr0 blank=as_needed <iso file>
+
+
+** Additional documentation
+/usr/share/simple-cdd
+/usr/share/doc/simple-cdd
+/usr/share/doc/installation-guide-amd64 (talks about preseeds)
+
# normally we should use the built-in simple_cdd_dir but I have doubts.. Let's use this.
# you'll probably want to change that
working_dir="/home/trc6500/cdd-attempt"
+working_dir=$(pwd)
# Profiles to include on the CD
profiles="trc6500"
build_profiles="trc6500"
auto_profiles="trc6500"
-do_mirror="false"
+do_mirror="true"
+debian_mirror="ftp://integration2/debian"
profiles_udeb_dist="wheezy"
mirror_component="main"
mirror_tools="wget"
# for now, this includes : myrc.local, TRC6500.pub, local_packages/firmware-bnx2, and the deb package with all the master files
# additionally, the bnx2 firmware is there because it resists being added to local_packages for some odd reason. So we'll install it by hand.
#all_extras="${working_dir}/master.tar.gz,${working_dir}/myrc.local,${working_dir}/TRC6500.pub,${working_dir}/local_packages/firmware-bnx2_0.36+wheezy.1_all.deb"
-all_extras="${working_dir}/myrc.local,${working_dir}/TRC6500.pub,${working_dir}/local_packages/firmware-bnx2_0.36+wheezy.1_all.deb, ${working_dir}/deb_build/trc6500-master-files*.deb"
+all_extras="${working_dir}/myrc.local,${working_dir}/TRC6500.pub,${working_dir}/local_packages/firmware-bnx2_0.36+wheezy.1_all.deb, $(find ${working_dir}/.. -maxdepth 1 -name trc6500-master-file\*.deb|sort|tail -1)"
# added value
export SPLASHPNG="${working_dir}/splash-thales.png"
--- /dev/null
+# -*- Makefile -*-
+
+DIR = ../master/
+
+CONFIGDIR = debian/
+
+FILES = $(shell cd $(DIR); find etc/ -type f)
+
+TARGET = ../$(MODULE)_$(VERSION)_$(ARCH).deb
+
+OBJECTS = deb/DEBIAN/preinst \
+ deb/DEBIAN/postrm \
+ deb/DEBIAN/postinst \
+ deb/opt/script
+
+SHELL=/bin/bash
+MODULE = $(shell basename `pwd`)
+ARCH = all
+
+.DEFAULT: all
+.PHONY: clean deb all
+
+VERSION = $(shell awk '/^$(MODULE)/ { gsub(/[()]/, ""); print $$2; exit }' debian/debian-changelog)
+
+
+all: $(TARGET) deb
+
+clean:
+ rm -rf deb $(OBJECTS) $(TARGETS)
+
+deb:
+ rm -rf deb
+ mkdir --parent deb/etc/webconfig/ deb/etc/default/ deb/DEBIAN
+
+deb/DEBIAN/preinst: debian/debian-preinst deb $(addprefix $(DIR)/, $(FILES)) $(MAKEFILE_LIST)
+ rm -f $@
+ cat $< > $@~
+ for f in $(FILES); do echo '[ -f "/'$$f'" ] && dpkg-divert --add /'$$f; done >>$@~
+ echo "exit 0" >>$@~
+ chmod +x $@~
+ mv $@~ $@
+
+deb/DEBIAN/postrm: debian/debian-postrm deb $(addprefix $(DIR)/, $(FILES)) $(MAKEFILE_LIST)
+ rm -f $@
+ cat $< > $@~
+ for f in $(FILES); do echo '[ -f "/'$$f'" ] && dpkg-divert --remove /'$$f; done >>$@~
+ echo "exit 0" >>$@~
+ chmod +x $@~
+ mv $@~ $@
+
+deb/DEBIAN/postinst: debian/debian-postinst deb
+ cp $< $@
+
+deb/opt/script: script deb
+ mkdir -p $@
+ cp $</* $@
+
+$(TARGET): deb $(OBJECTS)
+ sed s/@@version@@/$(VERSION)/ debian/debian-control > deb/DEBIAN/control
+ mkdir -p deb/usr/share/doc/$(MODULE)
+ cp debian/debian-changelog deb/usr/share/doc/$(MODULE)/changelog
+ cp -r $(DIR)/* deb/
+ fakeroot dpkg --build deb
+ mv deb.deb $@
--- /dev/null
+trc6500-master-file (7.8.4-1) unstable; urgency=low
+ * update softndesign packages
+ * remove rproxy default files
+
+ -- Laurent Mazet <laurent.mazet@thalesgroup.com> Mon, 14 Sep 2015 20:10:41 +0200
+
+trc6500-master-file (7.8.3-1) unstable; urgency=low
+ * Rebuild trc6500-master-file package to limit conflicts with trc6500 packages
+ * Add lite tarball for xdf-30mhz-lite
+ * Clean rc.local for xdf-12mhz, xdf-30mhz, and mhf
+ * Minimize usage of SDD
+ * Correct post install package script (force links creation)
+ * Remove internal debian mirror from master
+ * Kept aliases for swm and swg
+ * Restore eth1 on clovis-lite configuration
+
+ -- Laurent Mazet <laurent.mazet@thalesgroup.com> Tue, 28 Jul 2015 14:02:50 +0200
+
+trc6500-master-file (7.8.2-1) unstable; urgency=low
+
+ * Keep standard 30MHzDF and adds the lite configuration
+
+ -- Thomas Pérennou <thomas.perennou@external.thalesgroup.com> Mon, 22 Jun 2015 15:15:16 +0200
+
+trc6500-master-file (7.8.1-1) unstable; urgency=low
+
+ * .deb packaging
+
+ -- Olivier Leobal <olivier.leobal@thalesgroup.com> Wed, 10 Jun 2015 14:16:08 +0200
+
+trc6500-master-file (7.8.0-1) unstable; urgency=low
+
+ * initial release (#1337)
+ * added scripts from lgcore
+ * getswitchtemp fix
+ * inetd removal
+
+ -- Olivier Leobal <olivier.leobal@thalesgroup.com> Wed, 10 Jun 2015 12:46:08 +0200
--- /dev/null
+Section: TRC6500
+Priority: important
+Version: @@version@@
+Architecture: all
+Package: trc6500-master-files
+Maintainer: Olivier Léobal <olivier.leobal@thalesgroup.com>
+Description: files for the TRC6500's computing cluster's operating system
+ Contains mainly scripts and configuration files
+Homepage: http://www.thalesgroup.com/
--- /dev/null
+#!/bin/bash
+
+# since equivs can't handle symlinks, here we are doing them by hand. As of writing this script (2015-05-29), there are 11 symlinks to take care of.
+
+# I don't know why things were that way before, but I'm told to set them that way again.
+echo 'Moving things around..'
+[ -h /home ] || mv /home /var/media/backup
+mkdir -p /var/media/backup/dump/{core,dump_delay_line,dump_track_base,log,prod,rec,trace}
+ln -sf /var/media/backup/dump /
+ln -sf /var/media/backup/home /
+ln -sf /var/media/backup/rec /
+ln -sf /var/media/prod /var/media/backup/
+ln -sf /etc/hosts.30MHzMDF /etc/hosts.30MHz
+ln -sf /etc/hosts.8MHzMHF /etc/hosts.8MHz
+ln -sf /usr/lib/syslinux/menu.c32 /opt/tftp/menu.c32
+ln -sf /initrd.img /opt/tftp/initrd.img
+ln -sf /vmlinuz /opt/tftp/vmlinuz
+ln -sf /usr/lib/syslinux/pxelinux.0 /opt/tftp/pxelinux.0
+ln -sf /usr/lib/syslinux/memdisk /opt/tftp/memdisk
+echo 'Things moved.'
+
+# now enable all the scripts and such..
+echo 'Enabling on-startup scripts..'
+update-rc.d waitswitches defaults
+update-rc.d waitswitches enable
+update-rc.d etherwake defaults
+update-rc.d etherwake enable
+update-rc.d ipmiwake defaults
+update-rc.d ipmiwake enable
+update-rc.d wakeonlan defaults
+update-rc.d wakeonlan enable
+update-rc.d waitslaves defaults
+update-rc.d shutdownallblades defaults
+update-rc.d checkudevrules enable
+update-rc.d checkudevrules defaults
+echo 'Scripts enabled.'
+
+# and these other things too
+echo 'Finalizing configuration..'
+chown webconfig /etc/webconfig/alias.csv /etc/dhcp/dhcpd.conf*
+cp /etc/dhcp/dhcpd.conf.blank /etc/dhcp/dhcpd.conf
+chsh -s /usr/bin/pdmenu trc6500
+
+# from that sync_master.sh script.. Apparently there from Git shenanigans.
+chmod go-rwx /root/.ssh/id_rsa
+chmod go-rwx /opt/cluster/slave/root/.ssh
+chmod go-rwx /opt/cluster/slave/root/.ssh/id_rsa
+chmod a+rwx /opt/tftp
+
+echo "">/var/log/atftpd.log
+chown nobody /var/log/atftpd.log
+
+update-initramfs -u
+
+cd /opt/cluster
+# now this file is locked away during install and replaced by a dummy. So we put a duplicate of this in a script executed on first boot after the install.
+# this is still here because it is planned we install/update this on established systems
+[ -f /sbin/start-stop-daemon.REAL ] || make all
+echo 'Finalized.'
+
+
--- /dev/null
+#!/bin/sh
+
+# list of diverts
--- /dev/null
+#!/bin/bash
+
+# list of diverts
--- /dev/null
+This puts things and thongs together to get us a makeshift Debian package. Copied from the same in lgcore6500(git repo)/dev/services/webconfig. Use with caution.
+
+
+** How to use
+
+edit things in /debian, notably the control file
+
+edit the Makefile to include the files you want to include (ie, here, the master-files directory which is simply the "master" folder in the debian6500 git repo, without the symlinks)
+
+pray "make" will do the job
+
+
+** What files we need
+
+Everything in the debian/ folder, ie control, preinst, postinst and the like.
+Obviously they are not required for a _debian_ package but for _ours_ they are
+
+the ../additional_scripts folder. Please, please don't trash it away. These scripts come from the lgcore6500 repository, that's why they're no symlinks like for the master-files thing.
+
+
+** About versioning
+
+Let us say our package is version 7.8.1-1. This means it's the version 1 of the customization archive for Debian 7.8, hence 7.8.1. The -1 suffix is a package version, in theory it doesn't affect the contents, only how they're packaged.
+
+That's for version number. Remember also to list your changes in the debian-changelog in the debian/ folder ; it'll be useful to check the OS version on systems once it's installed.
--- /dev/null
+#!/bin/bash
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+
+# Date : 10/10/2013
+#
+# 05/11/2013 : LMa configuration des timezone Zulu(GMT) et Paris
+# Desactivation de pam pour ssh
+# ============================================================================
+
+# Switch configuration
+
+# TODO
+# *
+
+MODE_BW=""
+MODE_FIX=""
+MODE_HW=""
+MODE_NET=""
+MODE_TZ=""
+TARBALLS=""
+PROGNAME=$(basename $0)
+VER=1.0
+TMPLOG=/tmp/$PROGNAME-$$.log
+
+# help function
+
+function usage () {
+ echo "usage: $PROGNAME <mode>"
+ echo " switch trc6500 mode"
+ echo " avaliable modes are:"
+ echo " - 8MHzMHF, 12MHzDF, 12MHzMDF, 30MHzMDF 30MHzMDF.lite or 30MHzMHF"
+ echo " - fix_ssh"
+ echo " - hw_ibm or hw_supermicro"
+ echo " - network"
+ echo " - tz_zulu or tz_paris"
+ exit $@
+}
+
+# formating functions
+
+function title () { echo -e "\033[0;1m$*\033[0;0m"; }
+function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
+function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
+function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
+
+# check command
+
+function check () {
+ echo -n "$@: "
+ $@ 2>$TMPLOG && pass OK || { fail KO; cat $TMPLOG; exit 1; }
+ rm -f $TMPLOG
+}
+
+# argument processing
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -h) usage 0;;
+ 8mhz|8MHz|12mhzdf|12MHzDF|12mhzmdf|12MHzMDF|30mhzmdf|30MHzMDF|30mhzmdf.lite|30MHzMDF.lite|30mhzmhf|30MHzMHF) MODE_BW="${1^^}";;
+ fix_ssh) MODE_FIX="$1";;
+ hw_ibm|hw_supermicro) MODE_HW="$1";;
+ network) MODE_NET="$1";;
+ tz_paris|tz_zulu) MODE_TZ="$1";;
+ *) usage 1;;
+ esac
+ shift
+done
+
+# main process
+
+action=""
+
+if [ "$MODE_BW" ]; then
+ title "updating /etc/hosts"
+ MODE_BW=${MODE_BW/MHZ/MHz}
+ check rm -f /etc/hosts
+ check ln -s /etc/hosts.${MODE_BW/LITE/lite} /etc/hosts
+ TARBALLS+=" root"
+ for ip in 0A851{A,C}; do check ln -T -f -s default /opt/tftp/pxelinux.cfg/$ip; done
+ case "$MODE_BW" in
+ 8MHzMHF)
+ for ip in 0A851{A,C}A5; do check ln -T -f -s rec /opt/tftp/pxelinux.cfg/$ip; done
+ ;;
+ 12MHzDF) ;;
+ 12MHzMDF) ;;
+ 30MHzMDF) ;;
+ 30MHzMDF.lite)
+ for ip in 0A851{A,C}; do check ln -T -f -s lite /opt/tftp/pxelinux.cfg/$ip; done
+ check cp /etc/dhcp/dhcpd.conf.lite /etc/dhcp/dhcpd.conf
+ ;;
+ 30MHzMHF)
+ for ip in 0A851{A,C}A{1..6}; do check ln -T -f -s acq /opt/tftp/pxelinux.cfg/$ip; done
+ for ip in 0A851{A,C}A9; do check ln -T -f -s rec /opt/tftp/pxelinux.cfg/$ip; done
+ ;;
+ esac
+ action="done"
+fi
+
+if [ "$MODE_FIX" ]; then
+
+ case "$MODE_FIX" in
+ fix_ssh)
+ sed -i 's/^\(UsePAM\) yes/\1 no/' /etc/ssh/sshd_config
+ TARBALLS+=" root"
+
+ action="done"
+ esac
+
+fi
+
+if [ "$MODE_HW" ]; then
+
+ conf=/etc/default/shutdownallblades
+
+ title "change shutdownallblades"
+ if $(grep -sq '^#*REBOOT=' $conf); then
+ case "$MODE_HW" in
+ hw_ibm) check sed -i 's/^#*REBOOT=.*$/#REBOOT=yes/' $conf;;
+ hw_supermicro) check sed -i 's/^#*REBOOT=.*$/REBOOT=yes/' $conf;;
+ esac
+ else
+ case "$MODE_HW" in
+ hw_ibm) check sed -i '$a#REBOOT=yes' $conf;;
+ hw_supermicro) check sed -i '$aREBOOT=yes' $conf;;
+ esac
+ fi
+
+ action="done"
+fi
+
+if [ "$MODE_NET" ]; then
+
+ conf=/etc/dhcp/dhcpd.conf
+
+ title "update network configuraton"
+ if $(grep -sq 'trc[0-9]*_1' $conf); then
+ check sed -i 's/\(host.*trc[0-9][0-9]\)\([^_]\)/\1-rf\2/;s/\(host.*trc[0-9][0-9]\)_1/\1/' $conf
+ fi
+ TARBALLS+=" root"
+
+ action="done"
+fi
+
+if [ "$MODE_TZ" ]; then
+ case "$MODE_TZ" in
+ tz_paris) TZ="Europe/Paris";;
+ tz_zulu) TZ="Etc/Zulu";;
+ *) TZ="";;
+ esac
+
+ if [ "$TZ" ]; then
+ echo $TZ > /etc/timezone
+ TARBALLS+=" root"
+
+ action="done"
+ fi
+fi
+
+# last check
+[ "$action" ] || { echo "no mode specified"; exit 1; }
+
+[ "$TARBALLS" ] && make -f /opt/cluster/Makefile $TARBALLS
+
+# vim:set tabstop=4 expandtab shiftwidth=4:
--- /dev/null
+#!/bin/bash
+#
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Alexandre Cazalis
+#
+# Gestion attente lames esclaves au boot (ping,ssh)
+#
+# 2013-11-20 : V1.2 LMa
+# - Ajout de la personalisation de la commande a executer
+# par defaut (uptime). Ajout attente montage nfs avant demarrage
+# 2014-05-28 : V1.3 LMa
+# - Ajout d'un mode foreground pour ne tenter qu'une fois chaque commande
+# - Ajout d'une commande pour exclude la lame maitre
+#
+# 2014-10-28 : Change owner
+# ============================================================================
+
+# TODO
+# *
+
+CMD="uptime"
+MODE="iter"
+PROGNAME=$(basename $0)
+VER=1.3
+EXCLUDE="___"
+
+function usage () {
+ echo "usage: $PROGNAME [-c command] [-h] [-i] [-o] [-t seconds] [-v] [-w] [-x] host1 host2..."
+ echo " -c: set command (default '$CMD')"
+ echo " -h: help message"
+ echo " -i: infinity loop mode [default]"
+ echo " -o: only try ones"
+ echo " -t: timeout"
+ echo " -v: version message"
+ echo " -w: wait mode"
+ echo " -x: avoid master blade"
+ exit $@
+}
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -c) shift; CMD=$1;;
+ -h) usage 0;;
+ -i) MODE="iter";;
+ -o) MODE="ones";;
+ -t) shift; [[ "$1" =~ [^0-9] ]] && { echo "incorrect timeout ($1)"; exit 1;}; TIMEOUT=$1;;
+ -v) echo "$PROGNAME: version $VER"; exit;;
+ -w) MODE="wait";;
+ -x) EXCLUDE="trc00";;
+ *) list+=" "$1;;
+ esac
+ shift
+done
+
+# list
+[ "$list" ] || list=$(awk '{sub(/#.*/, "")} /trc[0-9][0-9]/ && ! /-rf/ {print $2}' /etc/hosts)
+list=$(echo $list" "|sed s/$EXCLUDE//)
+
+# timeout
+if [ "$TIMEOUT" ]; then
+ trap "echo 'timeout expired (${TIMEOUT}s)'; exit 0;" SIGVTALRM
+ ( sleep $TIMEOUT; kill -SIGVTALRM $$ 2>/dev/null; [ $? -eq 0 ] && rc=1 || rc=0; exit $rc) &
+fi
+trap "exit 0;" SIGINT
+
+# main loop
+while true; do
+ for host in $list; do
+ stat=0
+ echo -n ${host}:" "
+ ping -c 1 $host >&/dev/null && { ssh -t -o ConnectTimeout=1 root@$host "$CMD" 2>/dev/null && stat=1 || echo "soon..."; } || echo
+ [ "$MODE" = "wait" -a $stat -eq 1 ] && list=${list/$host }
+ done
+ [ "$MODE" = "ones" ] && break;
+ [[ "$list" =~ [a-zA-Z0-9_-] ]] && sleep 1 || break;
+done
--- /dev/null
+#!/bin/bash
+
+# parameters
+#
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+# 2013-11-10 V1.0 : Creation
+#
+# 2013-11-20 V1.1 : L.Mazet ajout possibilite de configuration du switch
+#
+# ============================================================================
+
+DRY=
+ID=
+IP=192.168.0.1
+TRC6500_SCRIPT_DIR=$(dirname $0)
+
+# help function
+
+function usage () {
+ echo "usage: $PROGNAME [-a] [-d] [-h] [-i <id>]"
+ echo " -a: configure all boards"
+ echo " -d: dry mode"
+ echo " -h: help message"
+ echo " -i: board id (from 1 to 5)"
+ exit $@
+ }
+
+# formating functions
+
+function title () { echo -e "\033[0;1m$*\033[0;0m"; }
+function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
+function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
+function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
+
+# configuration values
+
+# argument processing
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -a) ID=all;;
+ -d) DRY=yes;;
+ -h) usage 0;;
+ -i) shift; ID=$1;;
+ *) usage 1;;
+ esac
+ shift
+done
+
+# switch port configure function ()
+
+function sw_configure () {
+ case "$1" in
+ off) CMD="-c 'configure terminal' -c 'interface range g1/39-44' -c 'shutdown' -c end -c 'clear mac address-table dynamic' -c 'clear ip arp inspection log' -c exit";;
+ on) CMD="-c 'configure terminal' -c 'interface range g1/39-44' -c 'no shutdown' -c end -c exit";;
+ 1) CMD="-c 'configure terminal' -c 'interface g1/39' -c 'no shutdown' -c end -c exit";;
+ 2) CMD="-c 'configure terminal' -c 'interface g1/40' -c 'no shutdown' -c end -c exit";;
+ 3) CMD="-c 'configure terminal' -c 'interface g1/41' -c 'no shutdown' -c end -c exit";;
+ 4) CMD="-c 'configure terminal' -c 'interface g1/42' -c 'no shutdown' -c end -c exit";;
+ 5) CMD="-c 'configure terminal' -c 'interface g1/43' -c 'no shutdown' -c end -c exit";;
+ 6) CMD="-c 'configure terminal' -c 'interface g1/44' -c 'no shutdown' -c end -c exit";;
+ esac
+
+ if [ "$DRY" = "yes" ]; then
+ echo connect_switch.tcl -h swm $CMD
+ else
+ LOG=/tmp/$PROGNAME-$$.log
+ echo -n "sw_configure $1: "
+ eval $TRC6500_SCRIPT_DIR/connect_switch.tcl $CMD swm >&$LOG && pass OK || { fail KO; cat $LOG; exit 1; }
+ rm -f $LOG
+ fi
+}
+
+case "$ID" in
+1) CH1=0; CH2=1; CLOCKREF=external;;
+2) CH1=2; CH2=3; CLOCKREF=internal;;
+3) CH1=4; CH2=5; CLOCKREF=internal;;
+4) CH1=6; CH2=7; CLOCKREF=internal;;
+5) CH1=8; CH2=9; CLOCKREF=internal;;
+6) CH1=10; CH2=11; CLOCKREF=internal;;
+all)
+ for id in $(seq 1 5); do
+ title "switch off all fe306 ports"
+ sw_configure off
+ title "switch on port for fe306 $id"
+ sw_configure $id
+ title "configure fe306 $id"
+ if [ "$DRY" = "yes" ]; then
+ echo $(basename $0) -i $id
+ else
+ { $0 -i $id | mawk -W interactive '{print " " $0}'; } && pass OK || { fail KO; exit 1; }
+ fi
+ done
+ title "switch on all fe306 ports"
+ sw_configure on
+ exit 0
+ ;;
+*) echo "unknown fe306 id ($ID)"; exit 1;;
+esac
+
+# configure function
+
+function configure () {
+ echo -n "$1 [$2 <= $3]: "
+ if [ "$DRY" = "yes" ]; then
+ echo wget -q -O - http://$IP/$1?$2=$3
+ else
+ wget -q -O - http://$IP/$1?$2=$3 >/dev/null && pass OK || { fail KO; exit 1; }
+ fi
+}
+
+# setup local address
+
+title "setup local address"
+cmd="ifconfig eth1:1 192.168.0.2 netmask 255.255.255.0"
+[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd && pass OK || { fail KO; exit 1; }; }
+
+# check if fe306 is connected
+
+#title "check presence of $IP"
+#cmd="ping -c 1 -w 10 -W 10 $IP"
+#[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd >&/dev/null && pass OK || { warn KO; ifconfig eth1:1 down; exit 0; }; }
+
+# get serial number
+
+[ "$DRY" = "yes" ] && SN=00 || \
+ SN=$(wget -q -O - http://$IP/versions_en.html | mawk '/MODULE/ { module = 1 } /Serial Number/ { if (module) { printf "%02X", $4; exit 0 } }')
+
+[[ "$SN" =~ ^[0-9A-F][0-9A-F]$ ]] || { echo "unknown serial number ($SN)"; exit 1; }
+
+# configure ip
+
+title "configure ip"
+
+configure ModeServ.cmd serv_mode MANUAL
+configure MacServ.cmd serv_mac 00.80.EE.00.$SN.01
+configure IpServ.cmd serv_ip $(getent hosts | awk '/fe306-'$ID'/ {print $1}')
+configure MaskServ.cmd serv_mask 255.255.255.0
+
+for i in $(seq 1 8); do
+ configure MacProd$i.cmd prod_mac$i 00.80.EE.00.$SN.0$((i+1))
+ configure IpProd$i.cmd prod_ip$i 10.133.26.1$ID$i
+done
+
+configure IpMulticast.cmd multicast_ip 238.0.0.0
+configure RxMulticast.cmd multicast_rx 62002
+configure TxMulticast.cmd multicast_tx 62004
+configure TTL.cmd ttl 10
+
+# configure gps
+
+title "configure gps"
+
+configure GpsRate.cmd gps_rate 19200
+configure GpsChar.cmd gps_char 8
+configure GpsStop.cmd gps_stop 1
+configure GpsParity.cmd gps_parity no
+
+# configure miscellaneous
+
+title "configure miscellaneous"
+configure BoardNum.cmd board_num $ID
+configure RackNum.cmd rack_num 1
+configure Chan1Num.cmd channel1_num $CH1
+configure Chan2Num.cmd channel2_num $CH2
+
+configure FpgaLoc.cmd fpga_loc FLASH
+configure Clk10Mhz.cmd clk_10 $CLOCKREF
+configure PllConfig.cmd pll_cfg pll_cfg_02
+
+# unset local address
+
+title "unset local address"
+cmd="ifconfig eth1:1 down"
+[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd && pass OK || { fail KO; exit 1; }; }
+
+# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
--- /dev/null
+#!/usr/bin/expect
+
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+#
+# * V1.0 Laurent Mazet 29/04/2013
+# creation script de configuration de la matrice par ligne de commande
+# ============================================================================
+
+spawn /opt/trc6500/tools/matrix_tool
+
+set timeout 3
+
+exec ifconfig eth1:0 192.168.1.1 netmask 255.255.255.0
+
+proc cleanexit {rc} {
+ exec ifconfig eth1:0 down
+ exit $rc
+}
+
+expect {
+ "taper la commande choisie" { send "0\r" }
+ timeout { send_user "connection to $host timed out\n"; cleanexit 1 }
+ eof { send_user "connection to host failed\n"; cleanexit 1 }
+}
+expect {
+ "timeout detected" { send_user "can't connect on defaut ip\n"; cleanexit 1 }
+ "taper la commande choisie" { send "10\r" }
+}
+
+expect "nouvelle adresse" { send "010.133.026.253\r" }
+
+expect "taper la commande choisie" { send "12\r" }
+
+expect "taper la commande choisie" { send "14\r" }
+
+cleanexit 0
+# vim:set tabstop=4 expandtab shiftwidth=4:
--- /dev/null
+#!/usr/bin/expect
+
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+# Script de configuration du switchs
+#
+# 2013-10-10 V1.0 : Creation
+#
+# ============================================================================
+
+set host [lrange $argv 0 0]
+if { $host == "" } {
+ puts "usage: configure_switch.tcl \[sw1|sw2|swg1|swg2|swm\]"
+ exit 1
+}
+
+set tftpserver ""
+if { $host == "swg1" } { set tftpserver "10.133.26.160" }
+if { $host == "swg2" } { set tftpserver "10.133.26.160" }
+if { $host == "swm" } { set tftpserver "10.133.28.160" }
+if { $host == "sw1" } { set tftpserver "10.133.26.160" }
+if { $host == "sw2" } { set tftpserver "10.133.26.160" }
+if { $tftpserver == "" } { puts "unknown switch '$host'"; exit }
+
+set date [ exec date +%Y%m%d-%H:%m:%S ]
+set backup "$host-$date.txt"
+
+spawn telnet $host
+
+set timeout 30
+
+expect {
+ "Password:" { send "thales\r" }
+ incorrect { send_user "invalid password or account\n"; exit 1 }
+ timeout { send_user "connection to $host timed out\n"; exit 1 }
+ eof { send_user "connection to host failed\n"; exit 1 }
+}
+expect -exact ">" { send "enable\r" }
+expect "Password:" { send "thales\r" }
+expect "#" { send "copy running-config tftp://$tftpserver/$backup\r" }
+expect -exact "?" { send "$tftpserver\r" }
+expect -exact "?" { send "$backup\r" }
+expect "#" { send "copy tftp://$tftpserver/$host.txt startup-config\r" }
+expect -exact "?" { send "startup-config\r" }
+#expect "#" { send_user " << reload or exit ? >> "; interact }
+expect "#" { send "reload\r" }
+
+exit 0
+# vim:set tabstop=4 expandtab shiftwidth=4:
--- /dev/null
+#!/usr/bin/expect
+
+set host [lrange $argv 0 0]
+if { $host == "" } {
+ puts "usage: configure_switch_bootstrap.tcl \[sw1|sw2|swg1|swg2|swm\]"
+ exit 1
+}
+
+set ipaddress ""
+if { $host == "swg1" } { set ipaddress "10.133.26.231" }
+if { $host == "swg2" } { set ipaddress "10.133.26.232" }
+if { $host == "swm" } { set ipaddress "10.133.28.231" }
+if { $host == "sw1" } { set ipaddress "10.133.26.231" }
+if { $host == "sw2" } { set ipaddress "10.133.26.232" }
+if { $ipaddress == "" } { puts "unknown switch '$host'""; exit 1 }
+
+spawn screen -c . /dev/ttyUSB0
+
+set timeout 5
+
+set state 0
+while { $state != 1 } {
+ expect {
+ timeout { send "\r" }
+ -exact ">" { send "enable\r" }
+ "#" { set state 1 }
+ "Password:" { send "thales\r" }
+ eof { send_user "connection to host failed\n"; exit 1 }
+ }
+}
+
+send "configure terminal\r"
+expect "#" { send "interface vlan 1\r" }
+expect "#" { send "ip address $ipaddress 255.255.255.0\r" }
+expect "#" { send "exit\r" }
+expect "#" { send "line vty 0 4\r" }
+expect "#" { send "password thales\r" }
+expect "#" { send "enable password thales\r" }
+expect "#" { send "end\r" }
+
+# quit switch connection
+expect "#" { send "exit\r" }
+
+# to quit screen we need to send C-a \.
+send "\001\\"
+expect "kill all your windows" { send "y\r" }
+
+exit 0
+# vim:set tabstop=4 expandtab shiftwidth=4:
--- /dev/null
+#!/usr/bin/expect
+
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+# Script de connection au switchs
+#
+# 2013-10-10 V1.0 : Creation
+#
+# 2014-03-05 V1.1 : LMa ajout de passage de commande CISCO en parametre
+#
+# 2014-06-10 V1.2 : LMa ajout d'un fichier de commandes
+#
+# ============================================================================
+
+# default value
+set adminpassword "thales"
+set cmd {}
+set host ""
+set loginpassword "thales"
+set prompt "SW*"
+
+proc usage {rc} {
+ puts "usage: connect_switch.tcl \[host\] \[-a adminpassword\] \[-c command\] \[-f file\] \[-h\] \[-l loginpassword\] \[-p prompt\]"
+ exit $rc
+}
+
+# process argument
+set action ""
+for {set i 0} {$i < [llength $argv]} {incr i} {
+ set arg [lindex $argv $i]
+ switch $arg {
+ -a { set action "-adminpassword" }
+ -c { set action "-cmd" }
+ -f { set action "-file" }
+ -h { usage 0 }
+ -l { set action "-loginpassword" }
+ -p { set action "-prompt" }
+ default {
+ switch $action {
+ -adminpassword { set adminpassword $arg }
+ -cmd { set cmd [lappend cmd $arg] }
+ -file {
+ if {[file isfile $arg] == 1} then {
+ set f [open $arg "r"]
+ set data [read $f]
+ close $f
+ foreach line [split $data "\n"] {
+ set cmd [lappend cmd $line]
+ }
+ } else {
+ puts "can't open file '$arg'"
+ exit 1
+ }
+ }
+ -loginpassword { set loginpassword $arg }
+ -prompt { set prompt $arg }
+ default { set host $arg }
+ }
+ set action ""
+ }
+ }
+}
+if {$action != ""} {
+ puts "missing arguments"
+ exit 1
+}
+if { $host == "" } {
+ usage 1
+}
+
+# start connection
+spawn telnet $host
+
+# login password
+expect {
+ "Password:" { send "$loginpassword\r" }
+ timeout { send_user "connection to host failed\n"; exit 1 }
+ eof { send_user "connection to host failed\n"; exit 1 }
+}
+
+# admin password
+expect {
+ "$prompt>" { send "enable\r" }
+ timeout { send_user "connection to host failed\n"; exit 1 }
+ "Password:" { send_user "invalid login password\n"; exit 1 }
+}
+expect "Password:" { send "$adminpassword\r" }
+expect {
+ "$prompt#" { send "\r" }
+ "Password:" { send_user "invalid admin password\n"; exit 1 }
+}
+
+# commands or interactive mode
+if {[llength $cmd] == 0 } {
+ expect "$prompt#" { interact }
+} else {
+ expect "$prompt#" { send "terminal length 0\r" }
+ for {set i 0} {$i < [llength $cmd]} {incr i} {
+ expect {
+ "$prompt#" { send "[lindex $cmd $i]\r" }
+ "confirm" { send "\r"; continue }
+ }
+ }
+ expect {
+ "confirm" { send "\r"; expect "$prompt" { send "exit\r" } }
+ "$prompt" { send "exit\r" }
+ }
+ send_user "\n"
+}
+
+exit 0
+# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
--- /dev/null
+#!/usr/bin/perl
+
+open PROC_STAT, "</proc/stat";
+my @proc_stat=<PROC_STAT>;
+close PROC_STAT;
+my @cpu_stat_t0 = grep {s/^cpu\d+\s//} (@proc_stat);
+sleep 1;
+open PROC_STAT, "</proc/stat";
+my @proc_stat=<PROC_STAT>;
+close PROC_STAT;
+my @cpu_stat_t1 = grep {s/^cpu\d+\s//} (@proc_stat);
+
+my $total = 0;
+for (my $cpu_i=0; $cpu_i<(scalar @cpu_stat_t0); $cpu_i++) {
+ my @stat_t0 = split /\s+/, $cpu_stat_t0[$cpu_i];
+ my @stat_t1 = split /\s+/, $cpu_stat_t1[$cpu_i];
+ my ($t0_idle, $t1_idle) = ($stat_t0[3], $stat_t1[3]);
+ my ($t0_total, $t1_total) = (0, 0);
+ $t0_total += $_ foreach @stat_t0;
+ $t1_total += $_ foreach @stat_t1;
+
+ my $load = ($t1_total - $t0_total == 0) ? 100: int((100 * (($t1_total - $t0_total) - ($t1_idle - $t0_idle))/($t1_total - $t0_total)) + 0.5);
+ print " +" unless ($cpu_i == 0);
+ printf "% 5.1f%% ", $load;
+ $total += $load;
+}
+printf " = % 6.1f%%\n", $total;
--- /dev/null
+#!/bin/bash
+
+# parameters
+#
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+# 2014-10-06 V1.0 : Creation
+#
+# ============================================================================
+
+DRY=
+FIRMWARE=/opt/trc6500/config/code_metier/libHwCtrl/Bitstream
+LIST="application.out production.bin ts12_fp_pano.bin ts22_fp_pano.bin firmware.out"
+HOST=
+TRC6500_SCRIPT_DIR=$(dirname $0)
+
+# help function
+
+function usage () {
+ echo "usage: $PROGNAME [-d] [-f dir] [-h] [-i host] [-l list]"
+ echo " -d: dry mode"
+ echo " -f: firmware directory ($FIRMWARE)"
+ echo " -h: help message"
+ echo " -i: board hostname (or ip)"
+ echo " -l: list of firmware ($LIST)"
+ exit $@
+ }
+
+# formating functions
+
+function title () { echo -e "\033[0;1m$*\033[0;0m"; }
+function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
+function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
+function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
+
+# argument processing
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -d) DRY=yes;;
+ -f) shift; FIRMWARE=$1;;
+ -h) usage 0;;
+ -i) shift; HOST=$1;;
+ -l) shift; LIST=$1;;
+ *) usage 1;;
+ esac
+ shift
+done
+
+# check host
+
+[ "$HOST" ] || ping -c 1 $HOST >&/dev/null || \
+ { fail "Can't connect '$HOST'"; exit 1; }
+
+# check firmware
+
+for f in $LIST; do
+ [ -f $FIRMWARE/$f ] || { fail "Can't find '$FIRMWARE/$f'"; exit 1; }
+done
+
+# check mode
+
+protect=""
+[ "$DRY" = yes ] && protect="!echo"
+
+# flash firmware
+
+title "flash fe306 '$HOST'"
+
+ftp -n <<EOF
+open $HOST
+quote USER none
+quote PASS none
+binary
+cd flash
+$(for f in $LIST; do echo "$protect send $FIRMWARE/$f"; done)
+bye
+EOF
+
+# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
--- /dev/null
+#!/usr/bin/expect
+
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+# Script de connection au switchs
+#
+# 2014-10-06 V1.0 : Creation
+#
+# ============================================================================
+
+# default value
+set blade {0}
+set host ""
+set login "admin"
+set password "thalescom02"
+set prompt "system>"
+
+proc usage {script_name rc} {
+ puts "usage: [exec basename $script_name] \[host\] \[-b blade\] \[-h\] \[-l login\] \[-p password\] \[-x prompt\]"
+ exit $rc
+}
+
+# process argument
+set action ""
+for {set i 0} {$i < [llength $argv]} {incr i} {
+ set arg [lindex $argv $i]
+ switch $arg {
+ -b { set action "-blade" }
+ -h { usage $argv0 0 }
+ -l { set action "-login" }
+ -p { set action "-password" }
+ -x { set action "-prompt" }
+ default {
+ switch $action {
+ -blade { set blade $arg }
+ -login { set login $arg }
+ -password { set password $arg }
+ -prompt { set prompt $arg }
+ default { set host $arg }
+ }
+ set action ""
+ }
+ }
+}
+if {$action != ""} {
+ puts "missing arguments"
+ exit 1
+}
+if { $host == "" } {
+ usage $argv0 1
+}
+
+# start connection
+spawn telnet $host
+
+# login
+expect {
+ "username:" { send "$login\r" }
+ timeout { send_user "connection to host failed\n"; exit 1 }
+ eof { send_user "connection to host failed\n"; exit 1 }
+}
+
+
+# password
+expect {
+ "password:" { send "$password\r" }
+ timeout { send_user "connection to host failed\n"; exit 1 }
+ eof { send_user "connection to host failed\n"; exit 1 }
+}
+
+expect {
+ "$prompt" { send "mt -b $blade\r" }
+ "username:" { send_user "connection to host failed\n"; exit 1 }
+}
+
+expect {
+ "OK" { send "exit\r" }
+ "$prompt" { send_user "error\n"; exit 1 }
+}
+
+send_user "\n"
+exit 0
+# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
Soft'N'Design Software / projects / debian6500.git / commitdiff
