--- /dev/null
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+auto eth0
+iface eth0 inet dhcp
+ pre-up ip addr flush dev eth0
+ # FE306 pano
+ post-up ip route add 238.75.0.0/16 dev eth0
+ # FE306 WP channels
+ # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
+ # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000)
+ # => 2eme octet associe aux valeurs de 224 a 255
+ post-up ip route add 238.224.0.0/11 dev eth0
+
+
+# The secondary network interface
+auto eth1
+iface eth1 inet dhcp
+ pre-up ip addr flush dev eth1
+ # FE306 authentification
+ post-up ip route add 238.0.0.0/24 dev eth1
+ # FE306 RF channels
+ # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
+ # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000)
+ # => 2eme octet associe aux valeurs de 192 a 223
+ post-up ip route add 238.192.0.0/11 dev eth1
+ # Delay line
+ post-up ip route add 239.0.0.0/8 dev eth1
+ # Sensor prod
+ post-up ip route add 225.0.0.0/8 dev eth1
+
+auto eth2
+iface eth2 inet dhcp
+
+auto eth4
+iface eth4 inet dhcp
+
+auto eth3
+iface eth3 inet dhcp
+
+auto eth5
+iface eth5 inet dhcp
# Copyright (C) THALES. All rights reserved
# Author: Laurent Mazet
# Date : 02/05/2014
+# * 05/12/2014 ajout tarbal acq et rec
# ============================================================================
# TODO
# *
PROGNAME=$(basename $0)
-BLADES="slave"
+BLADES="acq slave rec"
CLUSTER=/opt/cluster
EXCLUDE=/tmp/$PROGNAME-exclude-$$
TFTP=/opt/tftp