X-Git-Url: https://secure.softndesign.org/git/?a=blobdiff_plain;f=master%2Fopt%2Fcluster%2Facq%2Fetc%2Fnetwork%2Finterfaces;fp=master%2Fopt%2Fcluster%2Facq%2Fetc%2Fnetwork%2Finterfaces;h=d6a3a0cf1ece944b8a5f1725b70b167493a9a5d8;hb=8a824b038b107ddb76f46fa06c06bd105f4e819f;hp=0000000000000000000000000000000000000000;hpb=1023da194240d0571ff92821f6e0eb4f512a2396;p=debian6500.git

diff --git a/master/opt/cluster/acq/etc/network/interfaces b/master/opt/cluster/acq/etc/network/interfaces
new file mode 100644
index 0000000..d6a3a0c
--- /dev/null
+++ b/master/opt/cluster/acq/etc/network/interfaces
@@ -0,0 +1,47 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+auto eth0
+iface eth0 inet dhcp
+	pre-up ip addr flush dev eth0
+	# FE306 pano
+	post-up ip route add 238.75.0.0/16 dev eth0
+	# FE306 WP channels
+	# Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
+	# => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000) 
+	# => 2eme octet associe aux valeurs de 224 a 255
+	post-up ip route add 238.224.0.0/11 dev eth0
+	
+
+# The secondary network interface
+auto eth1
+iface eth1 inet dhcp
+	pre-up ip addr flush dev eth1
+	# FE306 authentification
+	post-up ip route add 238.0.0.0/24 dev eth1
+	# FE306 RF channels
+	# Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
+	# => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000) 
+	# => 2eme octet associe aux valeurs de 192 a 223
+	post-up ip route add 238.192.0.0/11 dev eth1
+	# Delay line
+	post-up ip route add 239.0.0.0/8 dev eth1
+	# Sensor prod
+	post-up ip route add 225.0.0.0/8 dev eth1
+
+auto eth2
+iface eth2 inet dhcp
+
+auto eth4
+iface eth4 inet dhcp
+
+auto eth3
+iface eth3 inet dhcp
+
+auto eth5
+iface eth5 inet dhcp