X-Git-Url: https://secure.softndesign.org/git/?a=blobdiff_plain;f=install%2Fcluster%2Fmaster%2Fetc%2Fsnmp%2Fsnmpd.conf;fp=install%2Fcluster%2Fmaster%2Fetc%2Fsnmp%2Fsnmpd.conf;h=0000000000000000000000000000000000000000;hb=3a30026aa30355dac5c5f9742da0fdba797701ea;hp=436f30d3de84a2cf8c98bd33523c3fe7abf231c7;hpb=7fa766f7c1562671a1b5db6f365f6ec4e847c309;p=debian6500.git diff --git a/install/cluster/master/etc/snmp/snmpd.conf b/install/cluster/master/etc/snmp/snmpd.conf deleted file mode 100644 index 436f30d..0000000 --- a/install/cluster/master/etc/snmp/snmpd.conf +++ /dev/null @@ -1,197 +0,0 @@ -############################################################################### -# -# EXAMPLE.conf: -# An example configuration file for configuring the Net-SNMP agent ('snmpd') -# See the 'snmpd.conf(5)' man page for details -# -# Some entries are deliberately commented out, and will need to be explicitly activated -# -############################################################################### -# -# AGENT BEHAVIOUR -# - -# Listen for connections from the local system only -#agentAddress udp:127.0.0.1:161 -# Listen for connections on all interfaces (both IPv4 *and* IPv6) -#agentAddress udp:161,udp6:[::1]:161 - - - -############################################################################### -# -# SNMPv3 AUTHENTICATION -# -# Note that these particular settings don't actually belong here. -# They should be copied to the file /var/lib/snmp/snmpd.conf -# and the passwords changed, before being uncommented in that file *only*. -# Then restart the agent - -# createUser authOnlyUser MD5 "remember to change this password" -# createUser authPrivUser SHA "remember to change this one too" DES -# createUser internalUser MD5 "this is only ever used internally, but still change the password" - -# If you also change the usernames (which might be sensible), -# then remember to update the other occurances in this example config file to match. - - - -############################################################################### -# -# ACCESS CONTROL -# - - # system + hrSystem groups only -view systemonly included .1.3.6.1.2.1.1 -view systemonly included .1.3.6.1.2.1.25.1 - - # Full access from the local host -#rocommunity public localhost - # Default access to basic system info -# rocommunity public default -V systemonly -rocommunity public - # Full access from an example network - # Adjust this network address to match your local - # settings, change the community string, - # and check the 'agentAddress' setting above -#rocommunity secret 10.0.0.0/16 - - # Full read-only access for SNMPv3 - rouser authOnlyUser - # Full write access for encrypted requests - # Remember to activate the 'createUser' lines above -#rwuser authPrivUser priv - -# It's no longer typically necessary to use the full 'com2sec/group/access' configuration -# r[ou]user and r[ow]community, together with suitable views, should cover most requirements - - - -############################################################################### -# -# SYSTEM INFORMATION -# - -# Note that setting these values here, results in the corresponding MIB objects being 'read-only' -# See snmpd.conf(5) for more details -sysLocation Sitting on the Dock of the Bay -sysContact Me - # Application + End-to-End layers -sysServices 72 - - -# -# Process Monitoring -# - # At least one 'mountd' process -proc mountd - # No more than 4 'ntalkd' processes - 0 is OK -proc ntalkd 4 - # At least one 'sendmail' process, but no more than 10 -proc sendmail 10 1 - -# Walk the UCD-SNMP-MIB::prTable to see the resulting output -# Note that this table will be empty if there are no "proc" entries in the snmpd.conf file - - -# -# Disk Monitoring -# - # 10MBs required on root disk, 5% free on /var, 10% free on all other disks -disk / 10000 -disk /var 5% -includeAllDisks 10% - -# Walk the UCD-SNMP-MIB::dskTable to see the resulting output -# Note that this table will be empty if there are no "disk" entries in the snmpd.conf file - - -# -# System Load -# - # Unacceptable 1-, 5-, and 15-minute load averages -load 12 10 5 - -# Walk the UCD-SNMP-MIB::laTable to see the resulting output -# Note that this table *will* be populated, even without a "load" entry in the snmpd.conf file - - - -############################################################################### -# -# ACTIVE MONITORING -# - - # send SNMPv1 traps -# trapsink localhost public - # send SNMPv2c traps -trap2sink localhost public - # send SNMPv2c INFORMs -#informsink localhost public - -# Note that you typically only want *one* of these three lines -# Uncommenting two (or all three) will result in multiple copies of each notification. - - -# -# Event MIB - automatically generate alerts -# - # Remember to activate the 'createUser' lines above -iquerySecName internalUser -rouser internalUser - # generate traps on UCD error conditions -#defaultMonitors yes - # generate traps on linkUp/Down -linkUpDownNotifications yes - - - -############################################################################### -# -# EXTENDING THE AGENT -# - -# -# Arbitrary extension commands -# - extend test1 /bin/echo Hello, world! - extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35 -#extend-sh test3 /bin/sh /tmp/shtest - -# Note that this last entry requires the script '/tmp/shtest' to be created first, -# containing the same three shell commands, before the line is uncommented - -# Walk the NET-SNMP-EXTEND-MIB tables (nsExtendConfigTable, nsExtendOutput1Table -# and nsExtendOutput2Table) to see the resulting output - -# Note that the "extend" directive supercedes the previous "exec" and "sh" directives -# However, walking the UCD-SNMP-MIB::extTable should still returns the same output, -# as well as the fuller results in the above tables. - - -# -# "Pass-through" MIB extension command -# -#pass .1.3.6.1.4.1.8072.2.255 /bin/sh PREFIX/local/passtest -#pass .1.3.6.1.4.1.8072.2.255 /usr/bin/perl PREFIX/local/passtest.pl - -# Note that this requires one of the two 'passtest' scripts to be installed first, -# before the appropriate line is uncommented. -# These scripts can be found in the 'local' directory of the source distribution, -# and are not installed automatically. - -# Walk the NET-SNMP-PASS-MIB::netSnmpPassExamples subtree to see the resulting output - - -# -# AgentX Sub-agents -# - # Run as an AgentX master agent - master agentx - # Listen for network connections (from localhost) - # rather than the default named socket /var/agentx/master -#agentXSocket tcp:localhost:705 -rwcommunity private 10.133.28.160 -rocommunity readall -rwcommunity private localhost -pass_persist -p 100 .1.3.6.1.4.1.50005.1 /usr/bin/perl -x/opt/trc6500/snmp/ /opt/trc6500/snmp/THALES-TRC6500.pl