--- /dev/null
+#!/bin/bash
+
+# parameters
+#
+# ============================================================================
+#
+# Copyright (C) THALES. All rights reserved
+# Author: Laurent Mazet
+#
+# 2013-11-10 V1.0 : Creation
+#
+# 2013-11-20 V1.1 : L.Mazet ajout possibilite de configuration du switch
+#
+# ============================================================================
+
+DRY=
+ID=
+IP=192.168.0.1
+TRC6500_SCRIPT_DIR=$(dirname $0)
+
+# help function
+
+function usage () {
+ echo "usage: $PROGNAME [-a] [-d] [-h] [-i <id>]"
+ echo " -a: configure all boards"
+ echo " -d: dry mode"
+ echo " -h: help message"
+ echo " -i: board id (from 1 to 5)"
+ exit $@
+ }
+
+# formating functions
+
+function title () { echo -e "\033[0;1m$*\033[0;0m"; }
+function pass () { echo -e "\033[1;32m$*\033[0;0m"; }
+function warn () { echo -e "\033[1;33m$*\033[0;0m"; }
+function fail () { echo -e "\033[1;31m$*\033[0;0m"; }
+
+# configuration values
+
+# argument processing
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -a) ID=all;;
+ -d) DRY=yes;;
+ -h) usage 0;;
+ -i) shift; ID=$1;;
+ *) usage 1;;
+ esac
+ shift
+done
+
+# switch port configure function ()
+
+function sw_configure () {
+ case "$1" in
+ off) CMD="-c 'configure terminal' -c 'interface range g1/39-44' -c 'shutdown' -c end -c 'clear mac address-table dynamic' -c 'clear ip arp inspection log' -c exit";;
+ on) CMD="-c 'configure terminal' -c 'interface range g1/39-44' -c 'no shutdown' -c end -c exit";;
+ 1) CMD="-c 'configure terminal' -c 'interface g1/39' -c 'no shutdown' -c end -c exit";;
+ 2) CMD="-c 'configure terminal' -c 'interface g1/40' -c 'no shutdown' -c end -c exit";;
+ 3) CMD="-c 'configure terminal' -c 'interface g1/41' -c 'no shutdown' -c end -c exit";;
+ 4) CMD="-c 'configure terminal' -c 'interface g1/42' -c 'no shutdown' -c end -c exit";;
+ 5) CMD="-c 'configure terminal' -c 'interface g1/43' -c 'no shutdown' -c end -c exit";;
+ 6) CMD="-c 'configure terminal' -c 'interface g1/44' -c 'no shutdown' -c end -c exit";;
+ esac
+
+ if [ "$DRY" = "yes" ]; then
+ echo connect_switch.tcl -h swm $CMD
+ else
+ LOG=/tmp/$PROGNAME-$$.log
+ echo -n "sw_configure $1: "
+ eval $TRC6500_SCRIPT_DIR/connect_switch.tcl $CMD swm >&$LOG && pass OK || { fail KO; cat $LOG; exit 1; }
+ rm -f $LOG
+ fi
+}
+
+case "$ID" in
+1) CH1=0; CH2=1; CLOCKREF=external;;
+2) CH1=2; CH2=3; CLOCKREF=internal;;
+3) CH1=4; CH2=5; CLOCKREF=internal;;
+4) CH1=6; CH2=7; CLOCKREF=internal;;
+5) CH1=8; CH2=9; CLOCKREF=internal;;
+6) CH1=10; CH2=11; CLOCKREF=internal;;
+all)
+ for id in $(seq 1 5); do
+ title "switch off all fe306 ports"
+ sw_configure off
+ title "switch on port for fe306 $id"
+ sw_configure $id
+ title "configure fe306 $id"
+ if [ "$DRY" = "yes" ]; then
+ echo $(basename $0) -i $id
+ else
+ { $0 -i $id | mawk -W interactive '{print " " $0}'; } && pass OK || { fail KO; exit 1; }
+ fi
+ done
+ title "switch on all fe306 ports"
+ sw_configure on
+ exit 0
+ ;;
+*) echo "unknown fe306 id ($ID)"; exit 1;;
+esac
+
+# configure function
+
+function configure () {
+ echo -n "$1 [$2 <= $3]: "
+ if [ "$DRY" = "yes" ]; then
+ echo wget -q -O - http://$IP/$1?$2=$3
+ else
+ wget -q -O - http://$IP/$1?$2=$3 >/dev/null && pass OK || { fail KO; exit 1; }
+ fi
+}
+
+# setup local address
+
+title "setup local address"
+cmd="ifconfig eth1:1 192.168.0.2 netmask 255.255.255.0"
+[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd && pass OK || { fail KO; exit 1; }; }
+
+# check if fe306 is connected
+
+#title "check presence of $IP"
+#cmd="ping -c 1 -w 10 -W 10 $IP"
+#[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd >&/dev/null && pass OK || { warn KO; ifconfig eth1:1 down; exit 0; }; }
+
+# get serial number
+
+[ "$DRY" = "yes" ] && SN=00 || \
+ SN=$(wget -q -O - http://$IP/versions_en.html | mawk '/MODULE/ { module = 1 } /Serial Number/ { if (module) { printf "%02X", $4; exit 0 } }')
+
+[[ "$SN" =~ ^[0-9A-F][0-9A-F]$ ]] || { echo "unknown serial number ($SN)"; exit 1; }
+
+# configure ip
+
+title "configure ip"
+
+configure ModeServ.cmd serv_mode MANUAL
+configure MacServ.cmd serv_mac 00.80.EE.00.$SN.01
+configure IpServ.cmd serv_ip $(getent hosts | awk '/fe306-'$ID'/ {print $1}')
+configure MaskServ.cmd serv_mask 255.255.255.0
+
+for i in $(seq 1 8); do
+ configure MacProd$i.cmd prod_mac$i 00.80.EE.00.$SN.0$((i+1))
+ configure IpProd$i.cmd prod_ip$i 10.133.26.1$ID$i
+done
+
+configure IpMulticast.cmd multicast_ip 238.0.0.0
+configure RxMulticast.cmd multicast_rx 62002
+configure TxMulticast.cmd multicast_tx 62004
+configure TTL.cmd ttl 10
+
+# configure gps
+
+title "configure gps"
+
+configure GpsRate.cmd gps_rate 19200
+configure GpsChar.cmd gps_char 8
+configure GpsStop.cmd gps_stop 1
+configure GpsParity.cmd gps_parity no
+
+# configure miscellaneous
+
+title "configure miscellaneous"
+configure BoardNum.cmd board_num $ID
+configure RackNum.cmd rack_num 1
+configure Chan1Num.cmd channel1_num $CH1
+configure Chan2Num.cmd channel2_num $CH2
+
+configure FpgaLoc.cmd fpga_loc FLASH
+configure Clk10Mhz.cmd clk_10 $CLOCKREF
+configure PllConfig.cmd pll_cfg pll_cfg_02
+
+# unset local address
+
+title "unset local address"
+cmd="ifconfig eth1:1 down"
+[ "$DRY" = "yes" ] && echo $cmd || { echo -n $cmd" "; eval $cmd && pass OK || { fail KO; exit 1; }; }
+
+# vim:set tabstop=4 shiftwidth=4 softtabstop=4:
Soft'N'Design Software / projects / debian6500.git / blobdiff