change version

[debian6500.git] / master / opt / tftp / swm.txt

diff --git a/master/opt/tftp/swm.txt b/master/opt/tftp/swm.txt
index b3b3968e58c91da6610a25961f9f86e5cc306cb5..e49790b83357766ae3926f8b3a943feccbb01c3a 100644 (file)
--- a/master/opt/tftp/swm.txt
+++ b/master/opt/tftp/swm.txt
@@ -1,7 +1,7 @@
 
 !
-! Last configuration change at 17:08:58 UTC Tue Jun 11 2013
-! NVRAM config last updated at 17:09:01 UTC Tue Jun 11 2013
+! Last configuration change at 12:23:15 UTC Mon Sep 1 2014
+! NVRAM config last updated at 17:38:50 UTC Fri Jul 11 2014
 !
 version 12.2
 no service pad
@@ -21,6 +21,9 @@ boot-end-marker
 enable secret 5 $1$OMTZ$xM5SrEPag4m7MGrV1u86/0
 !
 !
+macro name VERSION
+macro description 2.4
+@
 !
 no aaa new-model
 ip subnet-zero
@@ -47,6 +50,9 @@ vlan internal allocation policy ascending
 vlan 10
  name SWITCH-IS
 !
+vlan 11
+ name SWITCH-IS-2
+!
 vlan 26
  name FE-306
 !
@@ -289,51 +295,55 @@ interface GigabitEthernet1/44
  spanning-tree portfast
 !
 interface GigabitEthernet1/45
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface GigabitEthernet1/46
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface GigabitEthernet1/47
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface GigabitEthernet1/48
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface TenGigabitEthernet1/49
+ switchport access vlan 10
+ switchport mode access
 !
 interface TenGigabitEthernet1/50
+ switchport access vlan 11
+ switchport mode access
 !
 interface TenGigabitEthernet1/51
 !
 interface TenGigabitEthernet1/52
 !
 interface Vlan1
- ip address 10.133.28.231 255.255.255.0
- ip pim dense-mode
+ ip address 10.133.28.231 255.255.254.0
+ ip pim sparse-mode
 !
 interface Vlan10
  ip address 100.100.100.100 255.255.255.0
  ip pim sparse-mode
 !
+interface Vlan11
+ ip address 110.110.110.110 255.255.255.0
+ ip pim sparse-mode
+!
 interface Vlan26
  ip address 10.133.26.230 255.255.255.0
  ip pim dense-mode
 !
 ip forward-protocol udp echo
-ip route 0.0.0.0 255.255.255.255 100.100.100.101
+ip route 0.0.0.0 0.0.0.0 100.100.100.101
 ip http server
 ip pim rp-address 100.100.100.100
 !
@@ -344,6 +354,9 @@ access-list 101 permit udp host 10.133.28.160 any eq echo
 control-plane
 !
 !
+snmp-server community public RO
+!
+!
 line con 0
  password 7 01070E05570E15
  logging synchronous