switch configurations for separated acq and mtc

[debian6500.git] / master / opt / tftp / sw2.txt

diff --git a/master/opt/tftp/sw2.txt b/master/opt/tftp/sw2.txt
index 78cf5c684d772715661991974a6fbb30fede1147..ebdcf2b9cd55629dcf736af98205020342429b4f 100644 (file)
--- a/master/opt/tftp/sw2.txt
+++ b/master/opt/tftp/sw2.txt
@@ -1,6 +1,7 @@
-macro name VERSION
-macro description 2.4 full-duplex
-@
+
+!
+! Last configuration change at 08:13:53 UTC Wed Jun 12 2013
+! NVRAM config last updated at 08:21:36 UTC Wed Jun 12 2013
 !
 version 12.2
 no service pad
@@ -10,7 +11,7 @@ service password-encryption
 service compress-config
 service sequence-numbers
 !
-hostname SWG2
+hostname SW2
 !
 boot-start-marker
 boot system flash bootflash:cat4500-ipbase-mz.122-54.SG1.bin
@@ -20,6 +21,10 @@ boot-end-marker
 enable secret 5 $1$OMTZ$xM5SrEPag4m7MGrV1u86/0
 !
 !
+macro name VERSION
+macro description 2.5
+@
+!
 no aaa new-model
 ip subnet-zero
 no ip domain-lookup
@@ -42,8 +47,8 @@ spanning-tree extend system-id
 !
 vlan internal allocation policy ascending
 !
-!
-!
+vlan 10
+ name INFORMATION-SYSTEM
 !
 !
 !
@@ -277,25 +282,23 @@ interface GigabitEthernet1/44
  spanning-tree portfast
 !
 interface GigabitEthernet1/45
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface GigabitEthernet1/46
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface GigabitEthernet1/47
- media-type rj45
  speed auto
  duplex auto
  spanning-tree portfast
 !
 interface GigabitEthernet1/48
- media-type rj45
+ switchport access vlan 10
+ switchport mode access
  speed auto
  duplex auto
  spanning-tree portfast
@@ -313,23 +316,28 @@ interface TenGigabitEthernet1/51
  channel-group 1 mode desirable
 !
 interface TenGigabitEthernet1/52
- channel-protocol pagp
- channel-group 1 mode desirable
+ switchport access vlan 10
+ switchport mode access
+ speed auto
+ duplex auto
+ spanning-tree portfast
 !
 interface Vlan1
- ip address 10.133.26.232 255.255.255.0
+ ip address 10.133.26.232 255.255.248.0
  ip pim sparse-mode
 !
+interface Vlan10
+ ip address 100.100.100.100 255.255.255.0
+ ip pim sparse-mode
 !
-!
-!
-!
-!
-!
+ip forward-protocol udp echo
+ip route 0.0.0.0 0.0.0.0 100.100.100.101
 ip http server
 ip pim rp-address 10.133.26.232
 !
+ip http server
 !
+access-list 101 permit udp host 10.133.28.160 any eq echo
 !
 control-plane
 !
@@ -350,6 +358,7 @@ line vty 5 15
  login
 !
 ntp clock-period 17179594
-ntp server 10.133.26.254
 ntp server 10.133.26.160
+ntp server 10.133.26.254
+ntp server 10.133.28.160
 end