Keep standard 30MHzDF and adds the lite configuration

[debian6500.git] / master / opt / cluster / slave / etc / network / interfaces

diff --git a/master/opt/cluster/slave/etc/network/interfaces b/master/opt/cluster/slave/etc/network/interfaces
index c9960515527560971f737e2b48cbb7a5e30528bf..10a14dc0287d16d19f46b31cc708fb2d6b6b6472 100644 (file)
--- a/master/opt/cluster/slave/etc/network/interfaces
+++ b/master/opt/cluster/slave/etc/network/interfaces
@@ -9,25 +9,8 @@ iface lo inet loopback
 auto eth0
 iface eth0 inet dhcp
        pre-up ip addr flush dev eth0
-       # FE306 pano
-       post-up ip route add 238.75.0.0/16 dev eth0
-       # FE306 WP channels
-       # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
-       # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000) 
-       # => 2eme octet associe aux valeurs de 224 a 255
-       post-up ip route add 238.224.0.0/11 dev eth0
-       # FE306 RF channels
-       # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
-       # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000) 
-       # => 2eme octet associe aux valeurs de 192 a 223
-       post-up ip route add 238.192.0.0/11 dev eth0
-       # Delay line
-       post-up ip route add 239.0.0.0/8 dev eth0
-       # FE306 authentification
-       post-up ip route add 238.0.0.0/24 dev eth0
-       # Sensor prod
-       post-up ip route add 225.0.0.0/8 dev eth0
 
 auto eth1
 iface eth1 inet dhcp
+       pre-up ip addr flush dev eth1