almost every thing is ready

[debian6500.git] / master / etc / network / interfaces

diff --git a/master/etc/network/interfaces b/master/etc/network/interfaces
new file mode 100644 (file)
index 0000000..843ddaa
--- /dev/null
+++ b/master/etc/network/interfaces
@@ -0,0 +1,44 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+auto eth0
+iface eth0 inet static
+       address 10.133.26.160
+       netmask 255.255.255.0
+       network 10.133.26.0
+       broadcast 10.133.26.255
+       pre-up ip addr flush dev eth0
+       # FE306 pano
+       post-up ip route add 238.75.0.0/16 dev eth0
+       # FE306 WP channels
+       # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
+       # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000) 
+       # => 2eme octet associe aux valeurs de 224 a 255
+       post-up ip route add 238.224.0.0/11 dev eth0
+       
+
+# The secondary network interface
+auto eth1
+iface eth1 inet static
+       address 10.133.28.160
+       netmask 255.255.255.0
+       network 10.133.28.0
+       broadcast 10.133.28.255
+       gateway 10.133.28.231
+       pre-up ip addr flush dev eth1
+       # FE306 authentification
+       post-up ip route add 238.0.0.0/24 dev eth1
+       # FE306 RF channels
+       # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
+       # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000) 
+       # => 2eme octet associe aux valeurs de 192 a 223
+       post-up ip route add 238.192.0.0/11 dev eth1
+       # Delay line
+       post-up ip route add 239.0.0.0/8 dev eth1
+       # Sensor prod
+       post-up ip route add 225.0.0.0/8 dev eth1