+++ /dev/null
-# This the default chrony.conf file for the Debian chrony package. After
-# editing this file use the command 'invoke-rc.d chrony restart' to make
-# your changes take effect. John Hasler <jhasler@debian.org> 1998-2008
-
-# See www.pool.ntp.org for an explanation of these servers. Please
-# consider joining the project if possible. If you can't or don't want to
-# use these servers I suggest that you try your ISP's nameservers. We mark
-# the servers 'offline' so that chronyd won't try to connect when the link
-# is down. Scripts in /etc/ppp/ip-up.d and /etc/ppp/ip-down.d use chronyc
-# commands to switch it on when a dialup link comes up and off when it goes
-# down. Code in /etc/init.d/chrony attempts to determine whether or not
-# the link is up at boot time and set the online status accordingly. If
-# you have an always-on connection such as cable omit the 'offline'
-# directive and chronyd will default to online.
-#
-# Note that if Chrony tries to go "online" and dns lookup of the servers
-# fails they will be discarded. Thus under some circumstances it is
-# better to use IP numbers than host names.
-
-server gps offline
-#server 0.debian.pool.ntp.org offline minpoll 8
-#server 1.debian.pool.ntp.org offline minpoll 8
-#server 2.debian.pool.ntp.org offline minpoll 8
-#server 3.debian.pool.ntp.org offline minpoll 8
-
-
-# Look here for the admin password needed for chronyc. The initial
-# password is generated by a random process at install time. You may
-# change it if you wish.
-
-keyfile /etc/chrony/chrony.keys
-
-# Set runtime command key. Note that if you change the key (not the
-# password) to anything other than 1 you will need to edit
-# /etc/ppp/ip-up.d/chrony, /etc/ppp/ip-down.d/chrony, /etc/init.d/chrony
-# and /etc/cron.weekly/chrony as these scripts use it to get the password.
-
-commandkey 1
-
-# I moved the driftfile to /var/lib/chrony to comply with the Debian
-# filesystem standard.
-
-driftfile /var/lib/chrony/chrony.drift
-
-# Comment this line out to turn off logging.
-
-log tracking measurements statistics
-logdir /var/log/chrony
-
-# Stop bad estimates upsetting machine clock.
-
-maxupdateskew 100.0
-
-# Dump measurements when daemon exits.
-
-dumponexit
-
-# Specify directory for dumping measurements.
-
-dumpdir /var/lib/chrony
-
-# Let computer be a server when it is unsynchronised.
-
-local stratum 10
-
-# Allow computers on the unrouted nets to use the server.
-
-#allow 10/8
-#allow 192.168/16
-#allow 172.16/12
-allow 10.133.26/24
-allow 10.133.28/24
-
-# This directive forces `chronyd' to send a message to syslog if it
-# makes a system clock adjustment larger than a threshold value in seconds.
-
-logchange 0.5
-
-# This directive defines an email address to which mail should be sent
-# if chronyd applies a correction exceeding a particular threshold to the
-# system clock.
-
-# mailonchange root@localhost 0.5
-
-# This directive tells chrony to regulate the real-time clock and tells it
-# Where to store related data. It may not work on some newer motherboards
-# that use the HPET real-time clock. It requires enhanced real-time
-# support in the kernel. I've commented it out because with certain
-# combinations of motherboard and kernel it is reported to cause lockups.
-
-rtcfile /var/lib/chrony/chrony.rtc
-
-# If the last line of this file reads 'rtconutc' chrony will assume that
-# the CMOS clock is on UTC (GMT). If it reads '# rtconutc' or is absent
-# chrony will assume local time. The line (if any) was written by the
-# chrony postinst based on what it found in /etc/default/rcS. You may
-# change it if necessary.
-# rtconutc
Soft'N'Design Software / projects / debian6500.git / blobdiff