-# This file describes the network interfaces available on your system
-# and how to activate them. For more information, see interfaces(5).
-
-# The loopback network interface
-auto lo
-iface lo inet loopback
-
-# The primary network interface
-auto eth0
-iface eth0 inet static
- address 10.133.26.160
- netmask 255.255.255.0
- network 10.133.26.0
- broadcast 10.133.26.255
- pre-up ip addr flush dev eth0
- # FE306 pano
- post-up ip route add 238.75.0.0/16 dev eth0
- # FE306 WP channels
- # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
- # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000)
- # => 2eme octet associe aux valeurs de 224 a 255
- post-up ip route add 238.224.0.0/11 dev eth0
-
-
-# The secondary network interface
-auto eth1
-iface eth1 inet static
- address 10.133.28.160
- netmask 255.255.255.0
- network 10.133.28.0
- broadcast 10.133.28.255
- gateway 10.133.28.231
- pre-up ip addr flush dev eth1
- # FE306 authentification
- post-up ip route add 238.0.0.0/24 dev eth1
- # FE306 RF channels
- # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
- # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000)
- # => 2eme octet associe aux valeurs de 192 a 223
- post-up ip route add 238.192.0.0/11 dev eth1
- # Delay line
- post-up ip route add 239.0.0.0/8 dev eth1
- # Sensor prod
- post-up ip route add 225.0.0.0/8 dev eth1