master/opt/cluster/acq/etc/network/interfaces

   1 # This file describes the network interfaces available on your system
   2 # and how to activate them. For more information, see interfaces(5).
   3
   4 # The loopback network interface
   5 auto lo
   6 iface lo inet loopback
   7
   8 # The primary network interface
   9 auto eth0
  10 iface eth0 inet dhcp
  11         pre-up ip addr flush dev eth0
  12         # FE306 pano
  13         post-up ip route add 238.75.0.0/16 dev eth0
  14         # FE306 WP channels
  15         # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
  16         # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000)
  17         # => 2eme octet associe aux valeurs de 224 a 255
  18         post-up ip route add 238.224.0.0/11 dev eth0
  19
  20
  21 # The secondary network interface
  22 auto eth1
  23 iface eth1 inet dhcp
  24         pre-up ip addr flush dev eth1
  25         # FE306 authentification
  26         post-up ip route add 238.0.0.0/24 dev eth1
  27         # FE306 RF channels
  28         # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
  29         # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000)
  30         # => 2eme octet associe aux valeurs de 192 a 223
  31         post-up ip route add 238.192.0.0/11 dev eth1
  32         # Delay line
  33         post-up ip route add 239.0.0.0/8 dev eth1
  34         # Sensor prod
  35         post-up ip route add 225.0.0.0/8 dev eth1
  36
  37 auto eth2
  38 iface eth2 inet dhcp
  39
  40 auto eth4
  41 iface eth4 inet dhcp
  42
  43 auto eth3
  44 iface eth3 inet dhcp
  45
  46 auto eth5
  47 iface eth5 inet dhcp