master/etc/network/interfaces.default

   1 # This file describes the network interfaces available on your system
   2 # and how to activate them. For more information, see interfaces(5).
   3
   4 # The loopback network interface
   5 auto lo
   6 iface lo inet loopback
   7
   8 # The primary network interface
   9 auto eth0
  10 iface eth0 inet static
  11         address 10.133.26.160
  12         netmask 255.255.255.0
  13         network 10.133.26.0
  14         broadcast 10.133.26.255
  15         pre-up ip addr flush dev eth0
  16         # FE306 pano
  17         post-up ip route add 238.75.0.0/16 dev eth0
  18         # FE306 WP channels
  19         # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
  20         # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000)
  21         # => 2eme octet associe aux valeurs de 224 a 255
  22         post-up ip route add 238.224.0.0/11 dev eth0
  23
  24 # The secondary network interface
  25 auto eth1
  26 iface eth1 inet static
  27         address 10.133.28.160
  28         netmask 255.255.255.0
  29         network 10.133.28.0
  30         broadcast 10.133.28.255
  31         gateway 10.133.28.231
  32         pre-up ip addr flush dev eth1
  33         # FE306 authentification
  34         post-up ip route add 238.0.0.0/24 dev eth1
  35         # FE306 RF channels
  36         # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
  37         # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000)
  38         # => 2eme octet associe aux valeurs de 192 a 223
  39         post-up ip route add 238.192.0.0/11 dev eth1
  40         # Delay line
  41         post-up ip route add 239.0.0.0/8 dev eth1
  42         # Sensor prod
  43         post-up ip route add 225.0.0.0/8 dev eth1