[debian6500.git] / simple-cdd / profiles / trc6500.postinst

#!/bin/sh
# this file is executed right at the end of installation, just before reboot.
# it operates from the point of view of the target computer, so / is the target's HDD and so on
# importantly enough, this is actually followed-up after reboot by a custom /etc/rc.local file, which erases itself after running (so it only runs on first reboot)
# the (abundant) feedback messages should not be visible, but they should appear on the installer's syslog. Also yes, I know writing "task finished" after something that might fail isn't the greatest thing.
# note that much of what used to be here was put in the postinst file for the deb package we unpack


mount /dev/cdrom /media/cdrom

# first we install the packages we couldn't install automatically
echo 'Installing additional package : firmware-bnx2...'
dpkg -i /media/cdrom/simple-cdd/firmware-bnx2_0.36+wheezy.1_all.deb
echo 'Additional packages installed'

#debugging
echo 'force-confnew' > /etc/dpkg/dpkg.cfg.d/trc6500

# now we unpack our master archive and replace all those conf files and scripts and things
echo 'Unpacking master config files...'
dpkg -i /media/cdrom/simple-cdd/trc6500-master-file* # version-proof
chown root /etc/cron.d/getswitchtemp
chown root /root/bin/get_switch_temperature
echo 'Files unpacked'

echo 'Adding TRC6500 public key to keyring...'
cat /media/cdrom/simple-cdd/TRC6500.pub | apt-key add -
echo 'Key added'

echo 'Removing exim packages...'
dpkg -l | awk '/exim/ {print $2}' | xargs dpkg --purge
echo 'Exim remove

# our interfaces file gets written over for some reason, we'll copy it and restore it on first boot
# note : after install, we'll be executing our own rc.local on first boot
echo 'Copying first-boot script (/etc/rc.local)...'
cp /etc/network/interfaces /etc/network/interfaces.original
mv /etc/rc.local /etc/rc.local.original
cp /media/cdrom/simple-cdd/myrc.local /etc/rc.local
echo 'Script copied'

echo 'Deleting simple-cdd files on disk...'
rm -r /usr/local/simple-cdd
rm -r /etc/dpkg/dpkg.cfg.d/trc6500
echo 'Files deleted'

umount /media/cdrom
Commit	Line	Data
	1	#!/bin/sh
	2	# this file is executed right at the end of installation, just before reboot.
	3	# it operates from the point of view of the target computer, so / is the target's HDD and so on
	4	# importantly enough, this is actually followed-up after reboot by a custom /etc/rc.local file, which erases itself after running (so it only runs on first reboot)
	5	# the (abundant) feedback messages should not be visible, but they should appear on the installer's syslog. Also yes, I know writing "task finished" after something that might fail isn't the greatest thing.
	6	# note that much of what used to be here was put in the postinst file for the deb package we unpack
	7
	8
	9	mount /dev/cdrom /media/cdrom
	10
	11	# first we install the packages we couldn't install automatically
	12	echo 'Installing additional package : firmware-bnx2...'
	13	dpkg -i /media/cdrom/simple-cdd/firmware-bnx2_0.36+wheezy.1_all.deb
	14	echo 'Additional packages installed'
	15
	16	#debugging
	17	echo 'force-confnew' > /etc/dpkg/dpkg.cfg.d/trc6500
	18
	19	# now we unpack our master archive and replace all those conf files and scripts and things
	20	echo 'Unpacking master config files...'
	21	dpkg -i /media/cdrom/simple-cdd/trc6500-master-file* # version-proof
	22	chown root /etc/cron.d/getswitchtemp
	23	chown root /root/bin/get_switch_temperature
	24	echo 'Files unpacked'
	25
	26	echo 'Adding TRC6500 public key to keyring...'
	27	cat /media/cdrom/simple-cdd/TRC6500.pub \| apt-key add -
	28	echo 'Key added'
	29
	30	echo 'Removing exim packages...'
	31	dpkg -l \| awk '/exim/ {print $2}' \| xargs dpkg --purge
	32	echo 'Exim remove
	33
	34	# our interfaces file gets written over for some reason, we'll copy it and restore it on first boot
	35	# note : after install, we'll be executing our own rc.local on first boot
	36	echo 'Copying first-boot script (/etc/rc.local)...'
	37	cp /etc/network/interfaces /etc/network/interfaces.original
	38	mv /etc/rc.local /etc/rc.local.original
	39	cp /media/cdrom/simple-cdd/myrc.local /etc/rc.local
	40	echo 'Script copied'
	41
	42	echo 'Deleting simple-cdd files on disk...'
	43	rm -r /usr/local/simple-cdd
	44	rm -r /etc/dpkg/dpkg.cfg.d/trc6500
	45	echo 'Files deleted'
	46
	47	umount /media/cdrom