| 1 | # This file describes the network interfaces available on your system |
| 2 | # and how to activate them. For more information, see interfaces(5). |
| 3 | |
| 4 | # The loopback network interface |
| 5 | auto lo |
| 6 | iface lo inet loopback |
| 7 | |
| 8 | # The primary network interface |
| 9 | auto eth0 |
| 10 | iface eth0 inet dhcp |
| 11 | pre-up ip addr flush dev eth0 |
| 12 | # FE306 pano |
| 13 | post-up ip route add 238.75.0.0/16 dev eth0 |
| 14 | # FE306 WP channels |
| 15 | # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h) |
| 16 | # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000) |
| 17 | # => 2eme octet associe aux valeurs de 224 a 255 |
| 18 | post-up ip route add 238.224.0.0/11 dev eth0 |
| 19 | # FE306 RF channels |
| 20 | # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h) |
| 21 | # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000) |
| 22 | # => 2eme octet associe aux valeurs de 192 a 223 |
| 23 | post-up ip route add 238.192.0.0/11 dev eth0 |
| 24 | # Delay line |
| 25 | post-up ip route add 239.0.0.0/8 dev eth0 |
| 26 | |
| 27 | # The secondary network interface |
| 28 | auto eth1 |
| 29 | iface eth1 inet dhcp |
| 30 | pre-up ip addr flush dev eth1 |
| 31 | # FE306 authentification |
| 32 | post-up ip route add 238.0.0.0/24 dev eth1 |
| 33 | # Sensor prod |
| 34 | post-up ip route add 225.0.0.0/8 dev eth1 |