Commit | Line | Data |
---|---|---|
14037e7d LM |
1 | # This file describes the network interfaces available on your system |
2 | # and how to activate them. For more information, see interfaces(5). | |
3 | ||
4 | # The loopback network interface | |
5 | auto lo | |
6 | iface lo inet loopback | |
7 | ||
8 | # The primary network interface | |
14037e7d LM |
9 | iface eth0 inet static |
10 | address 10.133.26.160 | |
11 | netmask 255.255.255.0 | |
12 | network 10.133.26.0 | |
13 | broadcast 10.133.26.255 | |
14 | pre-up ip addr flush dev eth0 | |
14037e7d LM |
15 | # FE306 pano |
16 | post-up ip route add 238.75.0.0/16 dev eth0 | |
17 | # FE306 WP channels | |
18 | # Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h) | |
190be33b | 19 | # => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000) |
14037e7d LM |
20 | # => 2eme octet associe aux valeurs de 224 a 255 |
21 | post-up ip route add 238.224.0.0/11 dev eth0 | |
14037e7d LM |
22 | |
23 | # The secondary network interface | |
24 | auto eth1 | |
25 | iface eth1 inet static | |
26 | address 10.133.28.160 | |
27 | netmask 255.255.255.0 | |
28 | network 10.133.28.0 | |
29 | broadcast 10.133.28.255 | |
30 | gateway 10.133.28.231 | |
31 | pre-up ip addr flush dev eth1 | |
190be33b LM |
32 | # FE306 authentification |
33 | post-up ip route add 238.0.0.0/24 dev eth1 | |
34 | # FE306 RF channels | |
35 | # Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h) | |
36 | # => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000) | |
37 | # => 2eme octet associe aux valeurs de 192 a 223 | |
38 | post-up ip route add 238.192.0.0/11 dev eth1 | |
39 | # Delay line | |
40 | post-up ip route add 239.0.0.0/8 dev eth1 | |
14037e7d | 41 | # Sensor prod |
190be33b | 42 | post-up ip route add 225.0.0.0/8 dev eth1 |