add a script to color log

[debian6500.git] / master / etc / network / interfaces.default

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
	address 10.133.26.160
	netmask 255.255.255.0
	network 10.133.26.0
	broadcast 10.133.26.255
	pre-up ip addr flush dev eth0
	# FE306 pano
	post-up ip route add 238.75.0.0/16 dev eth0
	# FE306 WP channels
	# Pour prod voie PV 2eme octet vaut 111X XX11 (cf. libfreqplan/freqplancommon.h)
	# => on met val de base vaut 224 (1110 0000) et mask a 224 (1110 0000)
	# => 2eme octet associe aux valeurs de 224 a 255
	post-up ip route add 238.224.0.0/11 dev eth0

# The secondary network interface
auto eth1
iface eth1 inet static
	address 10.133.28.160
	netmask 255.255.255.0
	network 10.133.28.0
	broadcast 10.133.28.255
	gateway 10.133.28.231
	pre-up ip addr flush dev eth1
	# FE306 authentification
	post-up ip route add 238.0.0.0/24 dev eth1
	# FE306 RF channels
	# Pour prod voie RF 2eme octet vaut 110X XX11 (cf. libfreqplan/freqplancommon.h)
	# => on met val de base vaut 192 (1100 0000) et mask a 224 (1110 0000)
	# => 2eme octet associe aux valeurs de 192 a 223
	post-up ip route add 238.192.0.0/11 dev eth1
	# Delay line
	post-up ip route add 239.0.0.0/8 dev eth1
	# Sensor prod
	post-up ip route add 225.0.0.0/8 dev eth1